Difference between revisions of "Door opening"
From Zenitel Wiki
| Line 1: | Line 1: | ||
'''Door opening''' is a feature triggered by pressing digit 6 during conversation with the door station. When pressing the digit, a [[RCO]] is triggered for 3,5 seconds (programmable from AlphaPro, [[Exchange_%26_System_%28AlphaPro%29#Timers|Exchange & System -> Systems -> Timers -> RCO Pulse (Door Open) Time)]]. The RCO output operates a relay on a [[MRBD]] relay board or the relay of the IP substation, to which the door magnet is connected. | '''Door opening''' is a feature triggered by pressing digit 6 during conversation with the door station. When pressing the digit, a [[RCO]] is triggered for 3,5 seconds (programmable from AlphaPro, [[Exchange_%26_System_%28AlphaPro%29#Timers|Exchange & System -> Systems -> Timers -> RCO Pulse (Door Open) Time)]]. The RCO output operates a relay on a [[MRBD]] relay board or the relay of the IP substation, to which the door magnet is connected. | ||
| + | |||
Related Articles: | Related Articles: | ||
| + | * [[1-4h._Door_Opening,_Code_Lock_(practice)|Door Opening - Configuration example]] | ||
* [[Door Opening - During Conversation (Event Type)]] | * [[Door Opening - During Conversation (Event Type)]] | ||
* [[Door Opening - Automatick Lock (Event Type)]] | * [[Door Opening - Automatick Lock (Event Type)]] | ||
Revision as of 10:34, 18 December 2013
Door opening is a feature triggered by pressing digit 6 during conversation with the door station. When pressing the digit, a RCO is triggered for 3,5 seconds (programmable from AlphaPro, Exchange & System -> Systems -> Timers -> RCO Pulse (Door Open) Time). The RCO output operates a relay on a MRBD relay board or the relay of the IP substation, to which the door magnet is connected.
Related Articles:
- Door Opening - Configuration example
- Door Opening - During Conversation (Event Type)
- Door Opening - Automatick Lock (Event Type)
- Door Opening using Dummy Number (Event Handler)
- Door opening of Ring Master stations from AlphaCom
- AlphaCom/M100 Integration - Door Opening
- Door Opening through AudioCodes
- Door Opening through SIP Trunk
- Map RCO to IP Station
- Turbine I/O Settings