Difference between revisions of "Delayed Reporting of Line Errors"
From Zenitel Wiki
(→Disable reporting to System Log) |
(→Disable reporting to System Log) |
||
| Line 20: | Line 20: | ||
[[Image:AP LogsAndErrors.png|thumb|500px|The Exchange & System > System > Logs and Errors window|none]] | [[Image:AP LogsAndErrors.png|thumb|500px|The Exchange & System > System > Logs and Errors window|none]] | ||
| + | |||
| + | |||
| + | == Configure Station Error reporting in Event Handler == | ||
Revision as of 16:55, 15 November 2018
By default station errors are reported more or less instantly when the AlphaCom server looses connection to an IP Station, or if there is an error on the analog ASLT station line.
Sometimes it could be convenient to delay the reporting, for example if there is maintenance work in the IP network, repatching of cables etc.
This article describes how to disable the default reporting, and how to use customized error reporting using the Event Handler instead.
Contents
Disable default Line Error reporting
Disable reporting to station
Station errors are by default sent to station on physical number 1. From AlphaPro one can disable this reporting.
Go to the Exchange & System > RCI > Faults window, select Fault Line > Change, and delete the MST command in the ON Action field.
Disable reporting to System Log
Station errors are by default sent to the System log. From AlphaPro one can disable this reporting.
Go to the Exchange & System > System > Logs and Errors window. Under "System Log", uncheck Line Error.
