Actions

Special

Search results

Page title matches

  • [[File:SIP User diagram.PNG|thumb|400px|SIP based System]] ...ces can be configured to operate in ''SIP Mode'', and can be used with any SIP based iPBX or Call Manager.
    9 KB (1,402 words) - 13:12, 12 January 2024
  • ==SIP Intercom Registration methods== This article describes the different methods for SIP registration on Zenitel IP stations.
    2 KB (323 words) - 09:25, 22 March 2023
  • {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...ation that is required for the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (313 words) - 17:25, 31 January 2023

Page text matches

  • {{S}}Software requirement: The SIP intercom must have firmware 01.11.x.x or later. [[Image:SIP Intercom 3.PNG|thumb|350px|SIP Intercom Configuration - User Information]]
    3 KB (405 words) - 12:40, 15 August 2022
  • {{S}}Software requirement: The SIP intercom must have firmware 02.02.3.1 or later. [[Image:Cisco8_1.png|thumb|left|500px|SIP Intercom Configuration - User Information]]
    3 KB (430 words) - 15:31, 13 March 2018
  • ==SIP Intercom Registration methods== This article describes the different methods for SIP registration on Zenitel IP stations.
    2 KB (323 words) - 09:25, 22 March 2023
  • #REDIRECT [[:category:SIP Intercom Mode]]
    41 bytes (5 words) - 10:38, 1 July 2022
  • The [[:Category:Stations#Turbine_stations|Turbine Intercom stations]] can be set to operate in one out of three different modes: * [[SIP Intercom - Web Interface|SIP mode]]
    399 bytes (57 words) - 14:31, 30 June 2022
  • * Caller id: Missing name in intercom display when receiving calls from Dect. The number is shown, but not the na * Ascom IPBS1 SIP Base Station ver 2.0.12, with two DECT handsets type 9D24 MKII, sw 3.26
    2 KB (275 words) - 15:00, 25 September 2007
  • [[image:1402001000.PNG|right|250px|IP School Intercom]] * [[IP Flush Connections|Intercom connections]]
    2 KB (322 words) - 09:48, 16 August 2022
  • ...d allows point to point calls from individual radio handsets to individual intercom units, and vice versa. ...pressing the M-key (= PTT) on the intercom station. When talking from the intercom station, the PTT of the radio gateway will be operated. Which talk group yo
    2 KB (307 words) - 09:51, 13 February 2024
  • {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...ation that is required for the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (312 words) - 17:25, 31 January 2023
  • {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...ation that is required for the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (313 words) - 17:25, 31 January 2023
  • {{S}}This article describes how to add a Stentofon Intercom station to Cisco Unified Call Manager 10. The first step is to add an end user to associate with the Intercom Station, then add the phone hardware and configure extension number.
    4 KB (650 words) - 15:30, 13 March 2018
  • {{S}}This article describes how to add a Zenitel Intercom station to Cisco Unified Call Manager 11.5. The first step is to add an end user to associate with the Intercom Station, then add the phone hardware and configure extension number.
    4 KB (650 words) - 16:34, 16 June 2023
  • Zenitel video devices connect in SIP mode to ACTpro through ACTentry. Click the ‘+’ icon to add an intercom
    5 KB (776 words) - 10:01, 12 May 2023
  • ...describes how to upload a certificate to the Turbine station for use with SIP TLS. *Select '''''SIP Configuration''''' tab and from the left hand menu select '''''Certificates
    675 bytes (94 words) - 14:33, 23 November 2020
  • Zenitel TCIS and TCIV+ intercom stations connect to MS Teams through CyberGate SaaS. The stations connect directly to Cybergate in SIP mode.
    2 KB (311 words) - 09:43, 14 April 2023
  • Turbine stations has a "Listen in" feature in SIP mode. If the station receives “X-Zenitel-Audio: listener” in a SIP INVITE message it means that the call will not be visible in the station an
    1,011 bytes (153 words) - 08:51, 28 September 2017
  • ...1008070000]] and [[IP Hotline Station - 1008070010|1008070010]] used in '''SIP mode'''. The configuration is done via the web interface of the station. Fo * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    1 KB (167 words) - 14:07, 23 February 2024
  • {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...ation that is required for the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (309 words) - 17:24, 31 January 2023
  • [[Category: SIP intercom - iPBX integrations]]
    300 bytes (34 words) - 14:25, 28 February 2019
  • [[Category: SIP intercom - iPBX integrations]]
    306 bytes (34 words) - 13:37, 28 February 2019
  • ...CSV file, which is used for number translation on incoming and/or outgoing SIP Trunk calls. ...rce of the caller (Caller ID) to be the public phone number instead of the intercom station number.
    3 KB (496 words) - 12:17, 24 February 2023
  • In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. [[Category: SIP intercom - Configuration]]
    911 bytes (120 words) - 10:01, 13 September 2019
  • ...te trouble shooting of SIP communication between an ICX or AlphaCom, and a SIP device. 4: SIP/AlphaNet message trace (default)
    2 KB (279 words) - 12:10, 24 October 2023
  • ...ty Center Software to ICX-AlphaCom or AlphaCom XE and intercom stations in SIP-mode. Sipelia is a small IPBX. Security Center operator positions have a SIP-client which register with Sipelia.
    2 KB (302 words) - 15:07, 26 June 2023
  • ...devices]]||3rd party SIP||Any 3rd party SIP device (SIP phone, softphone, SIP Speaker etc) must be manually added to the system | [[:category:Pulse - Telephone Gateways|SIP Telephone gateways]]||Gateway||[[GSM Gateway (Edge)|GSM telephone gateway]]
    3 KB (485 words) - 10:37, 9 April 2024
  • ...e and handset override can be activated when receiving [[Multicast Paging (SIP)|Multicast Paging]] by setting the Priority = Emergency. [[Category: SIP intercom - Configuration]]
    642 bytes (99 words) - 15:25, 12 September 2019
  • [[Category: SIP intercom - iPBX integrations]]
    358 bytes (44 words) - 13:36, 28 February 2019
  • ...blic_Address_-_Network_amplifiers|Exigo amplifiers can now be connected to SIP servers]] * [[IPv6 (SIP)|IPv6 is supported on Turbine devices when connecting to SIP servers]]
    1 KB (151 words) - 13:12, 16 August 2022
  • [[Category: SIP intercom - iPBX integrations]]
    386 bytes (52 words) - 13:33, 28 February 2019
  • ...d SIP calls. In order to work, it requires that the SIP device returns the SIP status "180 Ringing" when the phones starts to ring, and "200 OK" when conn * Alcatel OmniPCX (OXO) via SIP trunking
    2 KB (278 words) - 12:21, 24 February 2023
  • * [[IP Hotline Connections (INCA)|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (258 words) - 14:18, 12 February 2024
  • ...nged, and SIP Registrar node is no longer needed. Please see the article [[SIP phone as station]]''.}} ...ed in one exchange. The SIP registrar node receives REGISTER messages from SIP clients and maintains a list of currently registered clients.
    4 KB (569 words) - 09:35, 16 April 2019
  • [[Category: SIP intercom - iPBX integrations]]
    327 bytes (42 words) - 14:25, 28 February 2019
  • The Gallagher server acts as a SIP client with no registration.<br> [[File:No-Reg mode.png|left|thumb|578x578px|SIP Account Settings]]
    2 KB (275 words) - 00:57, 3 February 2023
  • [[Category: SIP intercom - iPBX integrations]]
    390 bytes (50 words) - 09:58, 14 October 2021
  • ...e in the top right corner. Then navigate to '''Advanced ICX-AlphaCom'''/'''SIP Configuration''' --> Audio Settings. [[Category: SIP intercom - Configuration]]
    748 bytes (100 words) - 08:55, 16 August 2022
  • ...,Vingtor-Stentofon,AlphaWikiZenitelWiki, ICX, Alphacom, IC-Edge, Pulse and SIP ...ical information about the platforms ICX, AlphaCom, IC-Edge, Pulse and SIP Intercom.
    7 KB (815 words) - 11:50, 29 February 2024
  • When used in '''SIP mode''', an IP station may be set up to automatically pull configuration fr ...ceives configuration via TFTP provisioning it will automatically switch to SIP mode.
    2 KB (252 words) - 09:22, 22 October 2019
  • * [[IP Video Doorstation Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (220 words) - 09:41, 16 August 2022
  • [[Category: SIP intercom - iPBX integrations]]
    549 bytes (64 words) - 12:12, 10 April 2024
  • * [[IP Video Doorstation Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (243 words) - 09:24, 16 August 2022
  • * [[IP Video Desk Connections|Connecting the Intercom station]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (260 words) - 09:25, 16 August 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Configuration guide for ECP-AA1 (SIP)|Configuration of ECP-AA1 station - SIP mode]]
    1 KB (172 words) - 12:09, 23 June 2023
  • * Select '''SIP Configuration > Time Settings''' from the menu [[File:SIP-Time Trbn.PNG|thumb|left|500px|Time Setting in a Turbine station]]
    1 KB (186 words) - 14:27, 23 November 2020
  • * [[IP Sub Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (201 words) - 09:20, 16 August 2022
  • ...sible to make only calls created using specified DAKs enable the stream in SIP mode. [[Category: SIP intercom - Configuration]]
    840 bytes (126 words) - 15:50, 25 November 2020
  • * Select '''SIP Configuration''' -> '''Keyboard''' (SIP mode), or * Select '''Advanced SIP''' > '''Keyboard''' (SIP mode), or
    2 KB (267 words) - 13:34, 23 November 2020
  • ...Hotline Station - 1008070010|1008070010]] used in '''Pulse mode''' and '''SIP mode'''. The configuration is done via the web interface of the station. Fo * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    1 KB (175 words) - 14:50, 30 June 2022
  • | '''SIP''' || || TCP || 5060 || ON | '''SIP''' || || UDP || 5060 || ON
    2 KB (191 words) - 16:22, 12 September 2023
  • * [[IP Sub Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (214 words) - 09:21, 16 August 2022
  • * [[IP Flush Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (211 words) - 11:43, 21 November 2023
  • * [[IP Sub Connections|Intercom connections]] * [[SIP Intercom - Web Interface|SIP mode]]
    2 KB (204 words) - 09:52, 16 August 2022
  • ...d how to program Security Expert to integrate Zenitel intercom devices via SIP communication. *An SX-SIP-10 license for Security Expert.
    7 KB (1,008 words) - 15:14, 16 March 2023
  • ...d how to program Security Expert to integrate Zenitel intercom devices via SIP communication. *An SX-SIP-10 license for Security Expert.
    7 KB (1,063 words) - 12:41, 23 August 2022
  • * In SIP or Edge mode, select '''SIP Configuration''' > '''OLED Labels''' [[Category: SIP intercom - Configuration]]
    1 KB (150 words) - 17:09, 24 March 2021
  • ...), the dialed digits are sent transparent through the AlphaCom, out on the SIP Trunk. ...example if one wants to make a [[Inquiry Call feature|call transfer]] (2 + intercom number + 3) or [[Blind Transfer During Connection|blind transfer]] after th
    2 KB (279 words) - 12:16, 23 February 2023
  • ...disabled. To enable, access the Webcall interface by selecting '''Advanced SIP''' > '''Webcall''', and check the flag '''Enable Web Call and Relay'''}} ...the Webcall interface when the station is in SIP mode, select '''Advanced SIP''' > '''Webcall'''.
    5 KB (706 words) - 16:41, 23 November 2020
  • [[File:SIP_Icon_300px.png|70px|link=Category:SIP Intercom Mode]]
    496 bytes (79 words) - 15:29, 26 October 2023
  • The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms. * [[SIP Intercom - Web Interface|SIP mode]]
    2 KB (233 words) - 15:09, 30 April 2024
  • For intercom devices and IP Speakers the DRC will normally have a good effect on regular *SIP mode: '''SIP Configuration''' > '''Audio Settings''' > '''Audio signal processing'''
    2 KB (330 words) - 14:28, 9 November 2023
  • ...CX/AlphaCom intercom servers and workstations, as well as their respective intercom devices. *SWINT-ALPHA Stentofon AlphaCom Intercom Interface
    6 KB (902 words) - 10:15, 15 August 2022
  • When devices are used in a SIP System, some additional settings are available when entering the '''Advance [[Category: SIP intercom - Configuration]]
    1 KB (148 words) - 11:19, 12 January 2024
  • {{AEIS}}[[file:TEIV-4+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with RFID card space<br>(1008318240)]] * [[SIP Intercom - Web Interface|SIP mode]]
    2 KB (219 words) - 12:36, 28 November 2023
  • ...he '''Language''' settings, you must enable [[Advanced Configuration Mode (SIP)|Advanced Configuration Mode]]}} Select '''SIP Configuration''' > '''Language'''. Download the english (or french) version
    1 KB (212 words) - 12:06, 19 May 2021
  • * [[IP Sub Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (219 words) - 13:31, 26 June 2023
  • {{AEIS}}[[file:TEIV-1+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with Keypad and Display<br>(1008317110)]] *[[SIP Intercom - Web Interface|SIP mode]]
    2 KB (229 words) - 17:21, 22 January 2024
  • * [[IP Desk Connections|Connecting the Intercom station]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (236 words) - 14:04, 2 May 2023
  • ...ed TKIS-2 Turbine Kit VoIP Intercom Module can be used to build customized intercom or help point solutions. It is also used as an interface towards external P * [[SIP Intercom - Web Interface|SIP mode]]
    2 KB (292 words) - 14:51, 29 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] ...ion guide for IP Heavy Duty (SIP)|Configuration of IP Heavy Duty station - SIP mode]]
    2 KB (268 words) - 13:30, 26 June 2023
  • ...eavy Duty Station|IP Heavy Duty Stations]] used in '''Pulse mode''' and '''SIP mode'''. The configuration is done via the web interface of the station. Fo * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    4 KB (557 words) - 14:49, 30 June 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Configuration guide for IP Hotline (SIP)]]
    2 KB (203 words) - 14:32, 12 February 2024
  • ...ariations in the speech level because the talker is at a distance from the intercom station, or talking with a low voice. The AGC feature is providing more amp === SIP and ICX-AlphaCom mode ===
    3 KB (439 words) - 15:57, 25 October 2023
  • The TCIA-2 is an IP based intercom with an analog front board intended for areas where exposure of the physica {{AEIPS}}[[file:TCIS-2newZ.png|200px|thumb|Analog over IP Intercom<br>(1008113020)|alt=]]
    3 KB (379 words) - 15:12, 29 January 2024
  • * [[IP Desk Connections|Connecting the Intercom station]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (240 words) - 14:05, 2 May 2023
  • == SIP mode == Log in to the Zenitel IP device, and navigate to '''SIP Configuration''' > '''Audio Settings''', and enable/disable "'''Automatic N
    3 KB (380 words) - 15:31, 25 October 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    1 KB (170 words) - 15:15, 23 June 2023
  • ...s. The application is free. It enables you to use your mobile device as an intercom station in the IC-EDGE system. * Supports 2-way video calls based on SIP & H.264 video codec
    5 KB (819 words) - 11:22, 20 February 2023
  • ...e is applicable for the [[IP Flush Master -V2|IP Flush Master]] used in '''SIP mode'''. It describes how to configure the station to queue incoming calls. * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (395 words) - 13:29, 12 September 2022
  • ...s a firmware archive for all [[:Category:Stations#INCA_stations|INCA based Intercom stations]] including devices: * A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
    4 KB (643 words) - 14:31, 28 February 2019
  • VSIS is an intercom solution software product package. The package includes: ...firmware for [[:Category:Stations#Turbine_stations|Turbine generation]] of intercom devices, ENA amplifiers and Exigo IP speakers.
    4 KB (664 words) - 10:05, 16 August 2022
  • *Select '''Edge Configuration'''/'''SIP Configuration''' and from the left hand menu select '''Certificates'''. The [[Category: SIP intercom - Configuration]]
    2 KB (264 words) - 11:23, 20 March 2024
  • *Click '''''Main Settings''''' from the left menu and select '<nowiki/>'''SIP.'''' ===Configure SIP Settings===
    5 KB (735 words) - 15:07, 6 August 2020
  • ...enable the use of the same software for handling both Passenger Emergency Intercom / Crew Communication and Public Address (PA), as well as the required Train *[[TFTP_Provisioning_(SIP)|Automatic Configuration using TFTP]]
    2 KB (270 words) - 09:55, 16 August 2022
  • {{AEIS}}[[file:TKIV+-newZ.png|right|300px|thumb|Turbine Video & VoIP Intercom Module<br>(1008331010)]] The TKIV+ VoIP kit enables you to build your own IP Intercom video station or Help-Point with HD camera.
    2 KB (336 words) - 14:44, 29 January 2024
  • [[Image:X-Lite 4.7 SIP Configuration.PNG|left|350px|thumb|SIP account configuration]] ...be defined in AlphaCom as a [[SIP_phone_as_station#AlphaCom_Configuration|SIP Station]].
    4 KB (669 words) - 10:12, 16 August 2022
  • The procedure for deploying IP-intercom stations is # Discovery of intercom devices
    15 KB (2,159 words) - 15:57, 16 August 2022
  • During conversation with the Door Intercom Station, the integrated relay of the door station can be operated by pressi ...to use, or the pulse time of the relay, from the web interface of the door intercom station:
    1 KB (180 words) - 12:34, 16 September 2019
  • To configure relay operation, select '''SIP Configuration''' > '''Relay/Outputs'''. ...ve), or '''Use Advanced Output Handler''': The "[[Advanced Output Handler (SIP)|Advanced Output Handler]]" makes it possible to better customize the relay
    3 KB (429 words) - 09:43, 27 February 2024
  • A [[:Category:VSIS Packages|VSIS Package]] is a collection of software for intercom solutions. == Vingtor-Stentofon Intercom Suite 4.11 ==
    5 KB (714 words) - 13:13, 16 August 2022
  • ...tations#Turbine_stations|Turbine station]] operating in '''Pulse''' and '''SIP''' mode. ...disabled. To enable, access the Webcall interface by selecting '''Advanced SIP''' > '''Webcall''', and check the flag '''Enable Web Call and Relay'''}}
    3 KB (457 words) - 09:51, 7 January 2020
  • ! style="background:#ffd400;" width="200" |Default Intercom Function * [[I/O Settings (SIP)|Inputs as Key Matrix (SIP)]]
    1 KB (189 words) - 18:09, 14 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (204 words) - 12:51, 23 June 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (207 words) - 13:37, 29 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (206 words) - 12:51, 23 June 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (209 words) - 13:37, 29 January 2024
  • During conversation with the Door Intercom Station, the integrated relay of the door station can be operated by pressi ...to use, or the pulse time of the relay, from the web interface of the door intercom station:
    1 KB (201 words) - 16:35, 12 September 2019
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[IP Flush Master - Call Queuing (SIP)|IP Flush Master - Call Queuing (SIP mode)]]
    2 KB (312 words) - 14:00, 29 January 2024
  • *[[Configure 3rd party SIP devices (Edge)|3rd Party SIP devices]]. Maximum 10 devices. |Intercom Extension||1009661001||License for additional Vingtor-Stentofon devices bey
    3 KB (448 words) - 11:05, 24 October 2023
  • ===MTN-1234 VS-SDK support for stations in SIP mode === ...l Device service. Configuration from VS-IMT was also added for stations in SIP mode as part of the VS-SDK for Pulse project type.
    2 KB (285 words) - 15:12, 27 January 2020
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (222 words) - 13:49, 29 January 2024

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)