Actions

Special

Search results

Page title matches

  • [[File:SIP User diagram.PNG|thumb|400px|SIP based System]] ...ces can be configured to operate in ''SIP Mode'', and can be used with any SIP based iPBX or Call Manager.
    9 KB (1,402 words) - 13:12, 12 January 2024
  • ==SIP Intercom Registration methods== This article describes the different methods for SIP registration on Zenitel IP stations.
    2 KB (323 words) - 09:25, 22 March 2023
  • {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...ation that is required for the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (313 words) - 17:25, 31 January 2023

Page text matches

  • {{S}}Software requirement: The SIP intercom must have firmware 01.11.x.x or later. [[Image:SIP Intercom 3.PNG|thumb|350px|SIP Intercom Configuration - User Information]]
    3 KB (405 words) - 12:40, 15 August 2022
  • {{S}}Software requirement: The SIP intercom must have firmware 02.02.3.1 or later. [[Image:Cisco8_1.png|thumb|left|500px|SIP Intercom Configuration - User Information]]
    3 KB (430 words) - 15:31, 13 March 2018
  • ==SIP Intercom Registration methods== This article describes the different methods for SIP registration on Zenitel IP stations.
    2 KB (323 words) - 09:25, 22 March 2023
  • #REDIRECT [[:category:SIP Intercom Mode]]
    41 bytes (5 words) - 10:38, 1 July 2022
  • The [[:Category:Stations#Turbine_stations|Turbine Intercom stations]] can be set to operate in one out of three different modes: * [[SIP Intercom - Web Interface|SIP mode]]
    399 bytes (57 words) - 14:31, 30 June 2022
  • * Caller id: Missing name in intercom display when receiving calls from Dect. The number is shown, but not the na * Ascom IPBS1 SIP Base Station ver 2.0.12, with two DECT handsets type 9D24 MKII, sw 3.26
    2 KB (275 words) - 15:00, 25 September 2007
  • [[image:1402001000.PNG|right|250px|IP School Intercom]] * [[IP Flush Connections|Intercom connections]]
    2 KB (322 words) - 09:48, 16 August 2022
  • ...d allows point to point calls from individual radio handsets to individual intercom units, and vice versa. ...pressing the M-key (= PTT) on the intercom station. When talking from the intercom station, the PTT of the radio gateway will be operated. Which talk group yo
    2 KB (307 words) - 09:51, 13 February 2024
  • {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...ation that is required for the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (312 words) - 17:25, 31 January 2023
  • {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...ation that is required for the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (313 words) - 17:25, 31 January 2023
  • {{S}}This article describes how to add a Stentofon Intercom station to Cisco Unified Call Manager 10. The first step is to add an end user to associate with the Intercom Station, then add the phone hardware and configure extension number.
    4 KB (650 words) - 15:30, 13 March 2018
  • {{S}}This article describes how to add a Zenitel Intercom station to Cisco Unified Call Manager 11.5. The first step is to add an end user to associate with the Intercom Station, then add the phone hardware and configure extension number.
    4 KB (650 words) - 16:34, 16 June 2023
  • Zenitel video devices connect in SIP mode to ACTpro through ACTentry. Click the ‘+’ icon to add an intercom
    5 KB (776 words) - 10:01, 12 May 2023
  • ...describes how to upload a certificate to the Turbine station for use with SIP TLS. *Select '''''SIP Configuration''''' tab and from the left hand menu select '''''Certificates
    675 bytes (94 words) - 14:33, 23 November 2020
  • Zenitel TCIS and TCIV+ intercom stations connect to MS Teams through CyberGate SaaS. The stations connect directly to Cybergate in SIP mode.
    2 KB (311 words) - 09:43, 14 April 2023
  • Turbine stations has a "Listen in" feature in SIP mode. If the station receives “X-Zenitel-Audio: listener” in a SIP INVITE message it means that the call will not be visible in the station an
    1,011 bytes (153 words) - 08:51, 28 September 2017
  • ...1008070000]] and [[IP Hotline Station - 1008070010|1008070010]] used in '''SIP mode'''. The configuration is done via the web interface of the station. Fo * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    1 KB (167 words) - 14:07, 23 February 2024
  • {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...ation that is required for the [[School IP Intercom - 1402001000|School IP Intercom]]. For general configuration and setup of IP stations, see:
    2 KB (309 words) - 17:24, 31 January 2023
  • [[Category: SIP intercom - iPBX integrations]]
    300 bytes (34 words) - 14:25, 28 February 2019
  • [[Category: SIP intercom - iPBX integrations]]
    306 bytes (34 words) - 13:37, 28 February 2019
  • ...CSV file, which is used for number translation on incoming and/or outgoing SIP Trunk calls. ...rce of the caller (Caller ID) to be the public phone number instead of the intercom station number.
    3 KB (496 words) - 12:17, 24 February 2023
  • In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station. [[Category: SIP intercom - Configuration]]
    911 bytes (120 words) - 10:01, 13 September 2019
  • ...te trouble shooting of SIP communication between an ICX or AlphaCom, and a SIP device. 4: SIP/AlphaNet message trace (default)
    2 KB (279 words) - 12:10, 24 October 2023
  • ...ty Center Software to ICX-AlphaCom or AlphaCom XE and intercom stations in SIP-mode. Sipelia is a small IPBX. Security Center operator positions have a SIP-client which register with Sipelia.
    2 KB (302 words) - 15:07, 26 June 2023
  • ...devices]]||3rd party SIP||Any 3rd party SIP device (SIP phone, softphone, SIP Speaker etc) must be manually added to the system | [[:category:Pulse - Telephone Gateways|SIP Telephone gateways]]||Gateway||[[GSM Gateway (Edge)|GSM telephone gateway]]
    3 KB (485 words) - 10:37, 9 April 2024
  • ...e and handset override can be activated when receiving [[Multicast Paging (SIP)|Multicast Paging]] by setting the Priority = Emergency. [[Category: SIP intercom - Configuration]]
    642 bytes (99 words) - 15:25, 12 September 2019
  • [[Category: SIP intercom - iPBX integrations]]
    358 bytes (44 words) - 13:36, 28 February 2019
  • ...blic_Address_-_Network_amplifiers|Exigo amplifiers can now be connected to SIP servers]] * [[IPv6 (SIP)|IPv6 is supported on Turbine devices when connecting to SIP servers]]
    1 KB (151 words) - 13:12, 16 August 2022
  • [[Category: SIP intercom - iPBX integrations]]
    386 bytes (52 words) - 13:33, 28 February 2019
  • ...d SIP calls. In order to work, it requires that the SIP device returns the SIP status "180 Ringing" when the phones starts to ring, and "200 OK" when conn * Alcatel OmniPCX (OXO) via SIP trunking
    2 KB (278 words) - 12:21, 24 February 2023
  • * [[IP Hotline Connections (INCA)|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (258 words) - 14:18, 12 February 2024
  • ...nged, and SIP Registrar node is no longer needed. Please see the article [[SIP phone as station]]''.}} ...ed in one exchange. The SIP registrar node receives REGISTER messages from SIP clients and maintains a list of currently registered clients.
    4 KB (569 words) - 09:35, 16 April 2019
  • [[Category: SIP intercom - iPBX integrations]]
    327 bytes (42 words) - 14:25, 28 February 2019
  • The Gallagher server acts as a SIP client with no registration.<br> [[File:No-Reg mode.png|left|thumb|578x578px|SIP Account Settings]]
    2 KB (275 words) - 00:57, 3 February 2023
  • [[Category: SIP intercom - iPBX integrations]]
    390 bytes (50 words) - 09:58, 14 October 2021
  • ...e in the top right corner. Then navigate to '''Advanced ICX-AlphaCom'''/'''SIP Configuration''' --> Audio Settings. [[Category: SIP intercom - Configuration]]
    748 bytes (100 words) - 08:55, 16 August 2022
  • ...,Vingtor-Stentofon,AlphaWikiZenitelWiki, ICX, Alphacom, IC-Edge, Pulse and SIP ...ical information about the platforms ICX, AlphaCom, IC-Edge, Pulse and SIP Intercom.
    7 KB (815 words) - 11:50, 29 February 2024
  • When used in '''SIP mode''', an IP station may be set up to automatically pull configuration fr ...ceives configuration via TFTP provisioning it will automatically switch to SIP mode.
    2 KB (252 words) - 09:22, 22 October 2019
  • * [[IP Video Doorstation Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (220 words) - 09:41, 16 August 2022
  • [[Category: SIP intercom - iPBX integrations]]
    549 bytes (64 words) - 12:12, 10 April 2024
  • * [[IP Video Doorstation Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (243 words) - 09:24, 16 August 2022
  • * [[IP Video Desk Connections|Connecting the Intercom station]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (260 words) - 09:25, 16 August 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Configuration guide for ECP-AA1 (SIP)|Configuration of ECP-AA1 station - SIP mode]]
    1 KB (172 words) - 12:09, 23 June 2023
  • * Select '''SIP Configuration > Time Settings''' from the menu [[File:SIP-Time Trbn.PNG|thumb|left|500px|Time Setting in a Turbine station]]
    1 KB (186 words) - 14:27, 23 November 2020
  • * [[IP Sub Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (201 words) - 09:20, 16 August 2022
  • ...sible to make only calls created using specified DAKs enable the stream in SIP mode. [[Category: SIP intercom - Configuration]]
    840 bytes (126 words) - 15:50, 25 November 2020
  • * Select '''SIP Configuration''' -> '''Keyboard''' (SIP mode), or * Select '''Advanced SIP''' > '''Keyboard''' (SIP mode), or
    2 KB (267 words) - 13:34, 23 November 2020
  • ...Hotline Station - 1008070010|1008070010]] used in '''Pulse mode''' and '''SIP mode'''. The configuration is done via the web interface of the station. Fo * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    1 KB (175 words) - 14:50, 30 June 2022
  • | '''SIP''' || || TCP || 5060 || ON | '''SIP''' || || UDP || 5060 || ON
    2 KB (191 words) - 16:22, 12 September 2023
  • * [[IP Sub Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (214 words) - 09:21, 16 August 2022
  • * [[IP Flush Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (211 words) - 11:43, 21 November 2023
  • * [[IP Sub Connections|Intercom connections]] * [[SIP Intercom - Web Interface|SIP mode]]
    2 KB (204 words) - 09:52, 16 August 2022
  • ...d how to program Security Expert to integrate Zenitel intercom devices via SIP communication. *An SX-SIP-10 license for Security Expert.
    7 KB (1,008 words) - 15:14, 16 March 2023
  • ...d how to program Security Expert to integrate Zenitel intercom devices via SIP communication. *An SX-SIP-10 license for Security Expert.
    7 KB (1,063 words) - 12:41, 23 August 2022
  • * In SIP or Edge mode, select '''SIP Configuration''' > '''OLED Labels''' [[Category: SIP intercom - Configuration]]
    1 KB (150 words) - 17:09, 24 March 2021
  • ...), the dialed digits are sent transparent through the AlphaCom, out on the SIP Trunk. ...example if one wants to make a [[Inquiry Call feature|call transfer]] (2 + intercom number + 3) or [[Blind Transfer During Connection|blind transfer]] after th
    2 KB (279 words) - 12:16, 23 February 2023
  • ...disabled. To enable, access the Webcall interface by selecting '''Advanced SIP''' > '''Webcall''', and check the flag '''Enable Web Call and Relay'''}} ...the Webcall interface when the station is in SIP mode, select '''Advanced SIP''' > '''Webcall'''.
    5 KB (706 words) - 16:41, 23 November 2020
  • [[File:SIP_Icon_300px.png|70px|link=Category:SIP Intercom Mode]]
    496 bytes (79 words) - 15:29, 26 October 2023
  • The IP Operating Room (OR) Master Station is an IP-based intercom station intended for use in operating theatres and clean rooms. * [[SIP Intercom - Web Interface|SIP mode]]
    2 KB (233 words) - 15:09, 30 April 2024
  • For intercom devices and IP Speakers the DRC will normally have a good effect on regular *SIP mode: '''SIP Configuration''' > '''Audio Settings''' > '''Audio signal processing'''
    2 KB (330 words) - 14:28, 9 November 2023
  • ...CX/AlphaCom intercom servers and workstations, as well as their respective intercom devices. *SWINT-ALPHA Stentofon AlphaCom Intercom Interface
    6 KB (902 words) - 10:15, 15 August 2022
  • When devices are used in a SIP System, some additional settings are available when entering the '''Advance [[Category: SIP intercom - Configuration]]
    1 KB (148 words) - 11:19, 12 January 2024
  • {{AEIS}}[[file:TEIV-4+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with RFID card space<br>(1008318240)]] * [[SIP Intercom - Web Interface|SIP mode]]
    2 KB (219 words) - 12:36, 28 November 2023
  • ...he '''Language''' settings, you must enable [[Advanced Configuration Mode (SIP)|Advanced Configuration Mode]]}} Select '''SIP Configuration''' > '''Language'''. Download the english (or french) version
    1 KB (212 words) - 12:06, 19 May 2021
  • * [[IP Sub Connections|Intercom connections]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (219 words) - 13:31, 26 June 2023
  • {{AEIS}}[[file:TEIV-1+ Front.png|right|300px|thumb|Turbine Extended IP Video Intercom with Keypad and Display<br>(1008317110)]] *[[SIP Intercom - Web Interface|SIP mode]]
    2 KB (229 words) - 17:21, 22 January 2024
  • * [[IP Desk Connections|Connecting the Intercom station]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (236 words) - 14:04, 2 May 2023
  • ...ed TKIS-2 Turbine Kit VoIP Intercom Module can be used to build customized intercom or help point solutions. It is also used as an interface towards external P * [[SIP Intercom - Web Interface|SIP mode]]
    2 KB (292 words) - 14:51, 29 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] ...ion guide for IP Heavy Duty (SIP)|Configuration of IP Heavy Duty station - SIP mode]]
    2 KB (268 words) - 13:30, 26 June 2023
  • ...eavy Duty Station|IP Heavy Duty Stations]] used in '''Pulse mode''' and '''SIP mode'''. The configuration is done via the web interface of the station. Fo * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    4 KB (557 words) - 14:49, 30 June 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Configuration guide for IP Hotline (SIP)]]
    2 KB (203 words) - 14:32, 12 February 2024
  • ...ariations in the speech level because the talker is at a distance from the intercom station, or talking with a low voice. The AGC feature is providing more amp === SIP and ICX-AlphaCom mode ===
    3 KB (439 words) - 15:57, 25 October 2023
  • The TCIA-2 is an IP based intercom with an analog front board intended for areas where exposure of the physica {{AEIPS}}[[file:TCIS-2newZ.png|200px|thumb|Analog over IP Intercom<br>(1008113020)|alt=]]
    3 KB (379 words) - 15:12, 29 January 2024
  • * [[IP Desk Connections|Connecting the Intercom station]] * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (240 words) - 14:05, 2 May 2023
  • == SIP mode == Log in to the Zenitel IP device, and navigate to '''SIP Configuration''' > '''Audio Settings''', and enable/disable "'''Automatic N
    3 KB (380 words) - 15:31, 25 October 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    1 KB (170 words) - 15:15, 23 June 2023
  • ...s. The application is free. It enables you to use your mobile device as an intercom station in the IC-EDGE system. * Supports 2-way video calls based on SIP & H.264 video codec
    5 KB (819 words) - 11:22, 20 February 2023
  • ...e is applicable for the [[IP Flush Master -V2|IP Flush Master]] used in '''SIP mode'''. It describes how to configure the station to queue incoming calls. * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (395 words) - 13:29, 12 September 2022
  • ...s a firmware archive for all [[:Category:Stations#INCA_stations|INCA based Intercom stations]] including devices: * A100G80200.02_08_X_X - Used for standard INCA IP Intercom devices
    4 KB (643 words) - 14:31, 28 February 2019
  • VSIS is an intercom solution software product package. The package includes: ...firmware for [[:Category:Stations#Turbine_stations|Turbine generation]] of intercom devices, ENA amplifiers and Exigo IP speakers.
    4 KB (664 words) - 10:05, 16 August 2022
  • *Select '''Edge Configuration'''/'''SIP Configuration''' and from the left hand menu select '''Certificates'''. The [[Category: SIP intercom - Configuration]]
    2 KB (264 words) - 11:23, 20 March 2024
  • *Click '''''Main Settings''''' from the left menu and select '<nowiki/>'''SIP.'''' ===Configure SIP Settings===
    5 KB (735 words) - 15:07, 6 August 2020
  • ...enable the use of the same software for handling both Passenger Emergency Intercom / Crew Communication and Public Address (PA), as well as the required Train *[[TFTP_Provisioning_(SIP)|Automatic Configuration using TFTP]]
    2 KB (270 words) - 09:55, 16 August 2022
  • {{AEIS}}[[file:TKIV+-newZ.png|right|300px|thumb|Turbine Video & VoIP Intercom Module<br>(1008331010)]] The TKIV+ VoIP kit enables you to build your own IP Intercom video station or Help-Point with HD camera.
    2 KB (336 words) - 14:44, 29 January 2024
  • [[Image:X-Lite 4.7 SIP Configuration.PNG|left|350px|thumb|SIP account configuration]] ...be defined in AlphaCom as a [[SIP_phone_as_station#AlphaCom_Configuration|SIP Station]].
    4 KB (669 words) - 10:12, 16 August 2022
  • The procedure for deploying IP-intercom stations is # Discovery of intercom devices
    15 KB (2,159 words) - 15:57, 16 August 2022
  • During conversation with the Door Intercom Station, the integrated relay of the door station can be operated by pressi ...to use, or the pulse time of the relay, from the web interface of the door intercom station:
    1 KB (180 words) - 12:34, 16 September 2019
  • To configure relay operation, select '''SIP Configuration''' > '''Relay/Outputs'''. ...ve), or '''Use Advanced Output Handler''': The "[[Advanced Output Handler (SIP)|Advanced Output Handler]]" makes it possible to better customize the relay
    3 KB (429 words) - 09:43, 27 February 2024
  • A [[:Category:VSIS Packages|VSIS Package]] is a collection of software for intercom solutions. == Vingtor-Stentofon Intercom Suite 4.11 ==
    5 KB (714 words) - 13:13, 16 August 2022
  • ...tations#Turbine_stations|Turbine station]] operating in '''Pulse''' and '''SIP''' mode. ...disabled. To enable, access the Webcall interface by selecting '''Advanced SIP''' > '''Webcall''', and check the flag '''Enable Web Call and Relay'''}}
    3 KB (457 words) - 09:51, 7 January 2020
  • ! style="background:#ffd400;" width="200" |Default Intercom Function * [[I/O Settings (SIP)|Inputs as Key Matrix (SIP)]]
    1 KB (189 words) - 18:09, 14 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (204 words) - 12:51, 23 June 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (207 words) - 13:37, 29 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (206 words) - 12:51, 23 June 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (209 words) - 13:37, 29 January 2024
  • During conversation with the Door Intercom Station, the integrated relay of the door station can be operated by pressi ...to use, or the pulse time of the relay, from the web interface of the door intercom station:
    1 KB (201 words) - 16:35, 12 September 2019
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[IP Flush Master - Call Queuing (SIP)|IP Flush Master - Call Queuing (SIP mode)]]
    2 KB (312 words) - 14:00, 29 January 2024
  • *[[Configure 3rd party SIP devices (Edge)|3rd Party SIP devices]]. Maximum 10 devices. |Intercom Extension||1009661001||License for additional Vingtor-Stentofon devices bey
    3 KB (448 words) - 11:05, 24 October 2023
  • ===MTN-1234 VS-SDK support for stations in SIP mode === ...l Device service. Configuration from VS-IMT was also added for stations in SIP mode as part of the VS-SDK for Pulse project type.
    2 KB (285 words) - 15:12, 27 January 2020
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (222 words) - 13:49, 29 January 2024
  • ...s a firmware archive for all [[:Category:Stations#INCA_stations|INCA based Intercom stations]] including devices: *A100G80200.02_09_X_X - Used for standard INCA IP Intercom devices
    5 KB (708 words) - 05:23, 8 March 2022
  • Zenitel IP stations support a selection of custom SIP headers to manipulate aspects of the call. These headers must be included i If the station receives “'''X-Zenitel-Audio: listener'''” in a SIP INVITE message it means that the call will not be visible in the station an
    3 KB (482 words) - 09:45, 6 February 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (216 words) - 12:52, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (216 words) - 12:52, 28 November 2023
  • ...eavy Duty Station|IP Heavy Duty Stations]] used in '''Pulse mode''' and '''SIP mode'''. The configuration is done via the web interface of the station. Fo * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    4 KB (625 words) - 14:49, 30 June 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (229 words) - 13:47, 29 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (230 words) - 15:47, 8 September 2023
  • == Main SIP account settings == ...iguration''' > '''Account / Call''' to access the page for configuring the SIP Account Settings.
    7 KB (1,047 words) - 14:56, 9 January 2023
  • * Enable [[Advanced Configuration Mode (SIP)|Advanced Configuration Mode]] * Select '''Advanced SIP''' > '''Tone test'''
    3 KB (491 words) - 10:59, 9 April 2021
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (239 words) - 09:54, 16 August 2022
  • |1 x Intercom Extension||1009661001||License for one IP Intercom. Note that the first 16 stations do not require any license |6 x Intercom Extensions||1009661006||License for 6 pcs of IP Intercoms. Note that the fi
    5 KB (796 words) - 16:30, 8 February 2023
  • ===SIP mode === * [[ENA Amplifier - Basic configuration (SIP mode)|Getting Started (SIP mode)]]
    3 KB (484 words) - 15:30, 29 February 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (230 words) - 12:52, 28 November 2023
  • ...the intercom station, regardless of the level of the audio signal from the intercom station. As soon as the phone operator stops speaking, the voice direction ...rced in private ringing mode, regardless of the private/open switch of the intercom station (this flag is moved from Exchange & System -> System -> Calls and O
    6 KB (1,004 words) - 17:23, 13 December 2017
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (223 words) - 12:50, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (223 words) - 12:50, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (217 words) - 12:38, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (217 words) - 12:46, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (217 words) - 12:47, 28 November 2023
  • ===SIP mode === * [[ENA Amplifier - Basic configuration (SIP mode)|Getting Started (SIP mode)]]
    3 KB (500 words) - 15:29, 29 February 2024
  • ===SIP mode === * [[ENA Amplifier - Basic configuration (SIP mode)|Getting Started (SIP mode)]]
    3 KB (494 words) - 09:52, 16 August 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (244 words) - 12:27, 29 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (224 words) - 12:50, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Direct Access Key & Ringlist Settings (SIP)]]
    3 KB (315 words) - 14:21, 31 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Direct Access Key & Ringlist Settings (SIP)]]
    3 KB (313 words) - 14:26, 31 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (245 words) - 09:48, 16 August 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (245 words) - 09:48, 16 August 2022
  • {{Note|When used in IC-Edge, Pulse or SIP mode, only 10 Direct Access Keys are supported }} * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (301 words) - 12:51, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (245 words) - 09:47, 16 August 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (225 words) - 12:38, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (230 words) - 12:47, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (230 words) - 12:46, 28 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (230 words) - 12:46, 28 November 2023
  • * Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU * [[SIP Intercom - Web Interface|SIP mode]]
    3 KB (344 words) - 12:22, 29 January 2024
  • * Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU * [[SIP Intercom - Web Interface|SIP mode]]
    3 KB (345 words) - 12:21, 29 January 2024
  • * Ex IP intercom for potentially explosive atmospheres - Directive 2014/34/EU * [[SIP Intercom - Web Interface|SIP mode]]
    3 KB (344 words) - 12:17, 29 January 2024
  • ===SIP mode=== *[[ENA Amplifier - Basic configuration (SIP mode)|Getting Started (SIP mode)]]
    3 KB (513 words) - 09:52, 16 August 2022
  • *SIP mode: '''SIP Configuration''' > '''Audio Settings''' > '''Audio signal processing''' [[Category: SIP intercom - Configuration]]
    2 KB (346 words) - 14:01, 7 November 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (269 words) - 14:37, 29 January 2024
  • *[[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (274 words) - 09:35, 7 March 2024
  • ===SIP mode=== ...menu '''SIP Settings''' to enter the IP address of the SIP server and the SIP ID (directory number) of the station.
    4 KB (651 words) - 13:16, 24 November 2020
  • *[[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]] *[[IP Flush Master - Call Queuing (SIP)|IP Flush Master - Call Queuing (SIP mode)]]
    3 KB (361 words) - 14:05, 2 May 2023
  • *[[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (250 words) - 14:06, 2 May 2023
  • This article describes how to set up the IP Video intercom '''ITSV-1''' to operate in a '''PULSE system'''. The phone can be used for ...e you need to upgrade the firmware, else the ITSV-1 station will require a SIP Phone license.
    11 KB (1,664 words) - 17:18, 11 March 2019
  • ...r 1000E R7.6 to interoperate with Zenitel Stentofon Turbine Intercom using SIP Line Gateway- Issue 0.1 ...s call scenarios with other Avaya telephones and Zenitel Stentofon Turbine Intercom units.
    11 KB (1,465 words) - 11:50, 17 March 2017
  • ...s is the intercom (AMCd) application. Examples of other applications are [[SIP]], [[Syslog (AlphaCom)|Syslog]], [[AlphaWeb]] (web server) and [[RMD|RingMa * Reset of the AMC application. This will restart the intercom application only. An AMC reset takes approx. xx seconds in a fully equipped
    2 KB (344 words) - 11:22, 8 September 2017
  • ...a firmware archive for all [[:Category:Stations#INCA_stations|INCA Family Intercom stations]] including devices: ==New Features - INCA Intercom==
    5 KB (854 words) - 05:24, 8 March 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (284 words) - 13:27, 25 October 2023
  • === SIP Phone === This license enables the use of 3rd party SIP telephones. Up to 10 SIP phones are supported.
    6 KB (770 words) - 14:40, 6 July 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (260 words) - 17:20, 24 November 2023
  • [[File:SIP User diagram.PNG|thumb|400px|SIP based System]] ...ces can be configured to operate in ''SIP Mode'', and can be used with any SIP based iPBX or Call Manager.
    9 KB (1,402 words) - 13:12, 12 January 2024
  • ...lush Master - 1008031000|IP Flush Master]] used in '''Pulse mode''' and '''SIP mode'''. It describes how to configure the station to queue incoming calls. * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    2 KB (402 words) - 14:50, 30 June 2022
  • * If all lines in the SIP gateway are busy, the '''call will be queued'''. When the line becomes free {{Note|The ICX-AlphaCom and SIP Gateway must be configured to use '''One Stage''' (Enbloc) dialing to achie
    9 KB (1,398 words) - 12:28, 24 February 2023
  • [[Category: SIP intercom - Configuration]]
    901 bytes (130 words) - 08:12, 5 April 2022
  • ...nced Configuration Mode (SIP)|Advanced Configuration]] mode, and select '''SIP Configuration > I/O''' from the menu [[File:SIP IOs.PNG|thumb|left|700px|The I/O settings page]]
    3 KB (465 words) - 11:17, 12 January 2024
  • An intercom station can be controlled from external applications, e.g. a web browser, u {{obs|'''HTTP commands''' are supported in '''Pulse''' mode and in '''SIP''' mode}}
    5 KB (704 words) - 09:51, 7 January 2020
  • * The station must be in Pulse, IC-Edge or SIP mode. [[Category: SIP intercom - Configuration]]
    2 KB (235 words) - 13:06, 20 October 2020
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (281 words) - 16:08, 23 June 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (280 words) - 16:09, 23 June 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (291 words) - 15:00, 5 February 2024
  • ...dge Controller]]". The Edge Controller is acting as a server for the other intercom stations in the system. Most Zenitel IP devices can act as an Edge Controll * UDP port 5060 for SIP
    4 KB (626 words) - 11:32, 2 June 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (291 words) - 15:01, 5 February 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (286 words) - 16:09, 23 June 2023
  • ...he ICX-AlphaCom can access the public telephony network by connecting to a SIP Service Provider on the internet. * Call Progress indication in calling intercom (ringing/call established)
    7 KB (1,036 words) - 10:22, 14 March 2023
  • ...[[IP Heavy Duty Station|IP Heavy Duty Stations]] used in '''Edge, Pulse or SIP mode'''. The configuration is done via the web interface of the station. Fo * [[SIP Intercom - Web Interface|IP Station Configuration - SIP mode]]
    4 KB (634 words) - 14:52, 30 June 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (294 words) - 16:09, 23 June 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (301 words) - 14:25, 7 February 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] * [[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (302 words) - 15:01, 5 February 2024
  • ...s in the "ipst" folder shows the communication between station and server (SIP or DIP protocol, depending on the mode of operation). # Intercom log (facility code 1): User-level messages, related to SIP call events
    6 KB (865 words) - 09:32, 27 February 2024
  • ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: ...ers''' (only SIP mode and ICX- AlphaCom mode), and '''ENA-2060''' (only in SIP mode)
    6 KB (936 words) - 10:18, 23 June 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (305 words) - 15:22, 23 June 2023
  • ...tions [[Vandal Resistant intercom - VR3G-1|VR3G-1]] and [[Vandal Resistant intercom - VR3G-1P|VR3G-1P]]: ...re the station, depends on the mode of operation (ICX-AlphaCom, IC-Edge or SIP mode).
    5 KB (848 words) - 16:01, 7 September 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (308 words) - 14:50, 29 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Relay_Settings_(SIP)|SIP mode]]
    3 KB (405 words) - 14:47, 22 April 2024
  • [[File:SIP Main.PNG|thumb|left|700px]] '''Station Mode:''' Select one of the available modes: ICX-AlphaCom, Exigo, SIP, Edge and Edge Controller.
    3 KB (396 words) - 13:11, 12 January 2024
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (312 words) - 12:22, 23 June 2023
  • *SIP mode: '''SIP Configuration''' > '''Audio Settings''' > '''Audio signal processing''' [[Category: SIP intercom - Configuration]]
    3 KB (430 words) - 15:33, 25 October 2023
  • * '''SIP mode''' - the device will register to a SIP server ...r Zenitel devices using the [[IMT - Discover & Upgrade|PC application IMT (Intercom Management Tool)]]. Start IMT, select '''Discover & Upgrade''' from main me
    2 KB (320 words) - 15:57, 7 September 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] *[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
    2 KB (325 words) - 12:22, 23 June 2023
  • ...ssword is entered, one have to manually enter the same password in the '''SIP Authentication Password''' field in the ITSV-1 unit. The password is used a === SIP account ===
    12 KB (1,807 words) - 12:23, 10 July 2020
  • {{A}}[[File:SIP phones.PNG|thumb|right|500px|AlphaCom XE as SIP Server]] ...XE server, and shows a feature comparison between SIP users and STENTOFON intercom stations.
    10 KB (1,521 words) - 12:00, 27 February 2023
  • ...mechanisms. The call restrictions for SIP phones must be configured in the SIP Gateway.
    7 KB (1,114 words) - 18:26, 11 February 2017
  • *'''AlphaCom''': [[Licenses#SIP_trunk_license|License for SIP Trunk, 100 9642 001]]. One license for each connected gateway. *'''ICX''': [[Licenses for ICX-500 and ICX-AlphaCom Core|ILI-SIP2 SIP Trunking, 2 lines, 1002602101]]. One license can serve two gateways.
    12 KB (1,892 words) - 15:14, 16 April 2024
  • ...er of Zenitel devices in the system is 32 or less. For devices above 32 an Intercom Extension license (1009661001) is required. ...ssword is entered, one have to manually enter the same password in the '''SIP Authentication Password''' field in the ITSV-5 unit. The password is used a
    12 KB (1,843 words) - 09:44, 1 February 2024
  • ...o the Edge Controller. [https://wiki.zenitel.com/wiki/Licensing_in_IC-EDGE SIP Client Extension license] is required. * Select '''3rd party SIP''' from the dropdown list
    8 KB (1,326 words) - 09:52, 6 July 2022
  • === SIP mode === Log in to the Zenitel IP device, and navigate to '''SIP Configuration''' > '''Audio Settings''', and enable "'''Automatic Volume Co
    4 KB (605 words) - 13:58, 16 November 2023
  • {{note|This article is applicable for the [[School IP Intercom - 1402001000]].}} ...or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)
    1 KB (168 words) - 17:25, 31 January 2023
  • VSIS is an intercom solution software product package. The package includes: ...firmware for [[:Category:Stations#Turbine_stations|Turbine generation]] of intercom devices: TCIS-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, TCIV-x, ECPIR-3P a
    7 KB (1,100 words) - 15:36, 11 March 2019
  • VSIS is an intercom solution software product package. The package includes: ...firmware for [[:Category:Stations#Turbine_stations|Turbine generation]] of intercom devices: TCIS-x, TKIS-2, TMIS-x, TFIE-x, TKIE-x, TFIX-x, TCIV-x, ECPIR-3P a
    7 KB (1,103 words) - 11:56, 5 April 2019
  • '''Multicast Paging''' enables IP intercom stations in SIP mode to receive VoIP audio as multicast paging from 3rd party iPBX (e.g. As * ''Multicast Paging is supported in '''SIP mode''' only''
    6 KB (858 words) - 15:49, 25 October 2023
  • ...a firmware archive for all [[:Category:Stations#INCA_stations|INCA Family Intercom stations]] including devices: ==New Features - INCA Intercom ==
    8 KB (1,185 words) - 09:44, 18 February 2020
  • * The Akuvox R29S requires a [[Licenses#SIP_station_license|SIP Station license]] in the ICX-AlphaCom server. The Directory Number (SIP User ID) and Name of the Akuvox R29S must be configured in the ICX-AlphaCom
    11 KB (1,727 words) - 12:05, 23 February 2023
  • *Configure SIP User *Configure SIP settings on the Turbine station
    14 KB (2,029 words) - 23:06, 23 April 2018
  • The VS-SDK for Pulse-enabled project lets you set up an intercom system project using our special Zenitel Application Protocol (ZAP). This t It also supports a configuration specific to VS-SDK for Pulse intercom applications.
    9 KB (1,460 words) - 11:36, 29 June 2023
  • ...er of Zenitel devices in the system is 32 or less. For devices above 32 an Intercom Extension license (1009661001) is required. ...ssword is entered, one have to manually enter the same password in the '''SIP Authentication Password''' field in the ITSV-4 unit. The password is used a
    13 KB (2,015 words) - 11:30, 24 October 2023
  • Select '''SIP Configuration''' > '''Account/Call''' to access the '''Call Settings''' pag [[File:SIP CallSettings2.PNG|thumb|left|700px|Call Settings]]
    10 KB (1,567 words) - 10:12, 22 February 2024
  • [[Category: ICX-AlphaCom - SIP Integration]] [[Category: AlphaCom - SIP Integration]]
    3 KB (526 words) - 12:15, 23 February 2023
  • The IP phone can only operate in SIP mode. ...re '''Account Name''', '''SIP Server''' (ICX-AlphaCom or IC-EdgePulse), '''SIP User ID''' (Extension Number).
    5 KB (885 words) - 11:16, 14 February 2024
  • * Audio Messaging services are supported when the station operates in SIP, Pulse or Edge mode. ...igits are DTMF 0 - 9, *, #. The event can be filtered by directory number (SIP ID).
    13 KB (2,116 words) - 15:25, 6 August 2020
  • <!-- [[File:Sipservice_edge.png|thumb|400px|The IC-EDGE System connects to a SIP trunk provider]] --> ...itional hardware such as MP-114 gateways. The IC-EDGE System connects to a SIP Service Provider on the internet which gives access to public telephony cal
    9 KB (1,446 words) - 17:35, 10 January 2024
  • ...er of Zenitel devices in the system is 32 or less. For devices above 32 an Intercom Extension license (1009661001) is required. ...ssword is entered, one have to manually enter the same password in the '''SIP Authentication Password''' field in the ITSV-2 unit. The password is used a
    14 KB (2,256 words) - 10:55, 30 June 2022
  • ...r softclient to be associated with the Milestone XProtect Smart Client, as SIP audio is routed through IC-Edge. *that IC-EDGE is operational, with all the system connected intercom devices and softclients configured
    7 KB (1,109 words) - 14:13, 22 March 2024
  • ...iatrix Gateway. This IP address must be identical to the IP address of the SIP Trunk Node created in AlphaPro. === SIP Configuration ===
    10 KB (1,475 words) - 17:39, 11 February 2017
  • The Vingtor-Stentofon Pulse system is a SIP intercom system intended for small to mid-size installations for up to 64 IP station *SIP Gateway interface that is easy to setup (e.g. SIP-to-GSM, SIP-to-PSTN, etc.)
    12 KB (1,790 words) - 09:57, 18 August 2023
  • ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: ...e), ENA2200-AC2, ENA2400-AC2 (ICX AlphaCom mode) and ENA2060-DC1 (only in SIP mode)
    6 KB (1,015 words) - 14:14, 1 February 2023
  • * Audio Messaging services are supported when the station operates in SIP, Pulse or Edge mode. ...igits are DTMF 0 - 9, *, #. The event can be filtered by directory number (SIP ID).
    13 KB (2,114 words) - 10:44, 24 November 2021
  • ...er of Zenitel devices in the system is 32 or less. For devices above 32 an Intercom Extension license (1009661001) is required. ...ssword is entered, one have to manually enter the same password in the '''SIP Authentication Password''' field in the ITSV-3 unit. The password is used a
    15 KB (2,356 words) - 14:27, 3 November 2022
  • ...d web browser (like Firefox or Chrome), or one can use the dedicated [[IMT|Intercom Management Tool IMT]]. ..."'''Pulse Server'''". The Pulse Server is acting as a server for the other intercom stations in the system. Any station can be a Pulse Server. However, more fe
    16 KB (2,446 words) - 14:15, 3 March 2022
  • *Create a SIP Extension for the Turbine station *Configure SIP Settings on the Turbine station
    18 KB (2,628 words) - 10:19, 24 April 2018
  • This article describes how you connect intercom audio calls to Microsoft Teams, by connecting ICX-Alphacom to the Microsoft ...ential ringing, which means multiple Teams users in the company can answer intercom calls from i.e. doors
    12 KB (1,927 words) - 09:47, 16 February 2023
  • Before a SIP Gateway Account can be created on the Pulse Server, you need to obtain the [[File:PulseSIPgwLicense.PNG|thumb|left|500px|Successfully installed SIP gateway license]]
    8 KB (1,249 words) - 13:17, 19 May 2020
  • * Audio Messaging services are supported when the station operates in SIP, Pulse or Edge mode. ...igits are DTMF 0 - 9, *, #. The event can be filtered by directory number (SIP ID).
    14 KB (2,234 words) - 12:21, 24 October 2023
  • *In SIP mode, select '''SIP Configuration''' > '''Address Book''' or * SIP URI scheme - user@hostname, user@ipaddress. Example: 201@building1.telecom.
    4 KB (661 words) - 17:10, 24 March 2021
  • In Stationweb, navigate to the Advanced Network tab, followed by VLAN. In SIP/EDGE mode, you will need to enable Advanced Configuration mode. ...with an Access VLAN ID for devices that are not tagged. In this way, the Intercom will be configured for the Voice VLAN, and the AUX port will automatically
    5 KB (903 words) - 10:28, 3 January 2024
  • This article describes how to set up Cisco Call Manager 6 with IP phones and SIP trunk line to AlphaCom.<br> * SIP Intercom
    15 KB (2,262 words) - 12:36, 15 August 2022
  • * Select '''SIP Configuration''' > '''Script Upload''', and click '''Browse''' to upload th * Configure the script with the required parameters. Select '''SIP Configuration''' > '''Script Configuration'''
    6 KB (881 words) - 15:22, 15 December 2022
  • It is recommended to use a dedicated VLAN for the intercom system. Grouping users into logical networks will increase performance by l ...ot going through the ICX-AlphaCom server, but peer to peer from e.g. TCIV+ intercom to ITSV video phone.
    6 KB (905 words) - 10:42, 24 January 2024
  • *'''Dialing Method [SIP mode only]''': Choose between Enbloc Dialing or Overlap Dialing (default=ov ...out period is from 1 to 9 seconds for the user to press M and dial entered intercom extension, otherwise number will be cancelled and user will need to re-ente
    9 KB (1,444 words) - 14:05, 12 January 2024
  • This article describes how to set up the '''ITSV-1''' Video Intercom to operate in a '''ICX or AlphaCom system'''. The ITSV can be used for audi *'''ICX system''': SIP station license (1002600700 ILS-SIP)
    13 KB (2,014 words) - 15:10, 16 March 2023
  • Select '''SIP Configuration''' > '''SIP Settings''' to access the page for configuring Call Settings. [[File:SIP CallSettings.png|thumb|left|500px|Call Settings]]
    10 KB (1,534 words) - 10:43, 9 February 2023
  • === Create a SIP Account === A SIP Account must be created at the Edge Controller.
    14 KB (2,208 words) - 16:40, 11 January 2024
  • IPv6 protocol is currently supported on all Turbine stations in SIP mode running image 5.1 3.x and above. IPv6 protocol is currently not suppor A station in SIP mode will show assigned IPv6 address on Main Information page. If private o
    9 KB (1,391 words) - 16:01, 6 March 2020
  • * '''SIP mode''': ''SIP Configuration'' > ''Video'' ...Call H.264''' - enables video stream in H.264 format to be visible in Edge/SIP calls.
    6 KB (892 words) - 11:26, 24 January 2024
  • ...of critical communication services. These services include ability to make intercom calls, public address calls, communicate with radios and make external tele ...makes it possible to connect [[SIP Devices - creating an account|3rd party SIP devices]] via IP.
    11 KB (1,604 words) - 12:28, 16 February 2024
  • [[Category: SIP intercom - Configuration]]
    2 KB (247 words) - 12:06, 5 October 2023
  • '''Description:''' VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: '''Compatibility: Turbine Video Plus intercom is compatible with Edge, SIP, ICX and AlphaCom systems.'''
    4 KB (660 words) - 05:04, 8 March 2022
  • ...ls) can be routed to an external telephone, either directly or first to an intercom station which can forward the call the external phone. When the telephone o ...18]], as the "speech detection" functionality depends on this gateway. The SIP gateway should be configured as described in the relevant AlphaWiki article
    15 KB (2,374 words) - 12:09, 24 February 2023
  • '''Description:''' VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: '''Compatibility: Turbine Video Plus intercom is compatible with Edge, SIP, ICX and AlphaCom systems.'''
    5 KB (729 words) - 05:05, 8 March 2022
  • 1=AlphaCom (Intercom Exchange)<br> 5=SIP node<br>
    2 KB (248 words) - 15:52, 3 October 2019
  • * [[SIP Intercom - Web Interface|SIP mode]] .... This mode of operation is default when the IP speaker is used in Edge or SIP mode. When used in ICX-AlphaCom mode, one have to [[PTT mode - IP Speakers|
    4 KB (632 words) - 12:15, 24 October 2023
  • This article describes how to set up the '''ITSV-2''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for aud *'''ICX system''': SIP station license (1002600700 ILS-SIP)
    15 KB (2,319 words) - 13:00, 17 August 2023
  • * Maximum Number of Intercom Exchanges (SWG-1340) ...Devices …’ to define the Edge Controller, additional intercom stations and intercom functions.
    12 KB (1,878 words) - 16:12, 15 August 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] .... This mode of operation is default when the IP speaker is used in Edge or SIP mode. When used in ICX-AlphaCom mode, one have to [[PTT mode - IP Speakers|
    4 KB (640 words) - 12:15, 24 October 2023
  • ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: '''AlphaCom and SIP Systems'''<br>
    12 KB (1,827 words) - 10:18, 23 June 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] .... This mode of operation is default when the IP speaker is used in Edge or SIP mode. When used in ICX-AlphaCom mode, one have to [[PTT mode - IP Speakers|
    4 KB (638 words) - 12:15, 24 October 2023
  • This article describes how to set up the '''ITSV-4''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for aud *'''ICX system''': SIP station license (1002600700 ILS-SIP)
    15 KB (2,349 words) - 15:28, 6 November 2023
  • == SIP Users in Simplex Conference == SIP users are not allowed to participate in a Simplex Conference.
    10 KB (1,584 words) - 12:55, 31 May 2023
  • ...top station or softclient to be associated with the MOBOTIX HUB client, as SIP audio is routed through IC-Edge. *that IC-EDGE is operational, with all the system connected intercom devices and softclients configured
    6 KB (977 words) - 13:26, 14 September 2023
  • This article describes how to set up the '''ITSV-5''' Video Intercom to operate in an '''ICX-AlphaCom or AlphaCom XE system'''. The ITSV can be *'''ICX-AlphaCom system''': SIP station license (1002600700 ILS-SIP)
    15 KB (2,352 words) - 15:28, 6 November 2023
  • ...dge Controller'''. The Edge Controller is acting as a server for the other intercom stations in the system. There can be only one Edge Controller in the instal | 1490000010||SDS-1||SIP Desk Station-1||No
    6 KB (839 words) - 11:02, 9 February 2023
  • ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: ...''' (only SIP mode and ICX- AlphaCom mode), and '''ENA2060-DC1''' (only in SIP mode)
    12 KB (1,908 words) - 12:53, 17 August 2022
  • * [[SIP Intercom - Web Interface|SIP mode]] .... This mode of operation is default when the IP speaker is used in Edge or SIP mode. When used in ICX-AlphaCom mode, one have to [[PTT mode - IP Speakers|
    4 KB (660 words) - 12:15, 24 October 2023
  • * [[SIP Intercom - Web Interface|SIP mode]] .... This mode of operation is default when the IP speaker is used in Edge or SIP mode. When used in ICX-AlphaCom mode, one have to [[PTT mode - IP Speakers|
    4 KB (652 words) - 12:14, 24 October 2023
  • This article describes how to set up the '''ITSV-3''' Video Intercom to operate in an '''ICX or AlphaCom system'''. The ITSV can be used for aud *'''ICX system''': SIP station license (1002600700 ILS-SIP)
    16 KB (2,396 words) - 13:00, 17 August 2023
  • ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: ...''' (only SIP mode and ICX- AlphaCom mode), and '''ENA-2060DC1''' (only in SIP mode)
    10 KB (1,600 words) - 10:18, 23 June 2022
  • [[Category: SIP intercom - Configuration]]
    2 KB (259 words) - 16:06, 25 May 2023
  • The IC-EDGE system is a SIP intercom system intended for small to mid-size installations for up to 64 IP station ...dge Controller]]". The Edge Controller is acting as a server for the other intercom stations in the system. Most Zenitel IP devices can act as an Edge Controll
    12 KB (1,742 words) - 12:26, 15 January 2024
  • '''Description:''' VSF-Fortitude8 is a firmware for Turbine Video Plus Intercom including the following devices: '''Compatibility: Turbine Video Plus intercom is compatible with Edge, SIP, ICX-AlphaCom and AlphaCom systems.'''
    2 KB (331 words) - 05:06, 8 March 2022
  • ...mware archive for all [[:Category:Stations#Turbine_stations|Turbine Family Intercom stations]] including devices: ...0-AC''' (only SIP mode and ICX- AlphaCom mode), '''ENA2060-DC1''' (only in SIP mode) and '''ENA2200-AC2''' & '''ENA2400-AC2''' (ICX-AlphaCom mode only).
    6 KB (858 words) - 13:40, 21 November 2022
  • ...n echo is loud and delay is long. In loud speaking applications such as IP intercom it is therefore critical to have mechanism that ensure lowest possible dela ...echo that is returned. For applications where the speaker is close to the intercom (door and gate applications) a low microphone sensitivity should be used.
    4 KB (670 words) - 15:12, 27 October 2023

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)