Difference between revisions of "TKIE Connections"
From Zenitel Wiki
(→Input/Output Connections) |
|||
| Line 1: | Line 1: | ||
[[File:TKIE-2.PNG|right|300px]] | [[File:TKIE-2.PNG|right|300px]] | ||
| − | + | __NOTOC__ | |
| + | This article describes all Turbine Extended Kit connections. | ||
| − | {| border="1" | + | There are two RJ-45 ports located on the Turbine Extended Kit that are used for PoE/LAN Ethernet connection. |
| − | |Ethernet/Power|| | + | |
| + | There are 6 I/O connection options for the Turbine Extended Kit. These connections are used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems. | ||
| + | |||
| + | {|border="1" | ||
| + | |Ethernet/Power|| The Turbine Extended Kit supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.* | ||
|- | |- | ||
| − | |Secondary Power || 24 VDC | + | |Secondary Power || If PoE is not available, the Turbine Extended Kit can be powered from a 24-48 VDC local power supply.** |
|- | |- | ||
| − | |Relays || There | + | |Relays || There are two Double Throw relay contacts with 60W switching power. COM, NO, NC contacts are provided. |
|- | |- | ||
| − | |Input/Output || 6 | + | |Input/Output || 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
|- | |- | ||
|Audio Line Out || A balanced 600 ohm audio line out with induction loop signal | |Audio Line Out || A balanced 600 ohm audio line out with induction loop signal | ||
Revision as of 14:22, 17 October 2016
This article describes all Turbine Extended Kit connections.
There are two RJ-45 ports located on the Turbine Extended Kit that are used for PoE/LAN Ethernet connection.
There are 6 I/O connection options for the Turbine Extended Kit. These connections are used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.
| Ethernet/Power | The Turbine Extended Kit supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.* |
| Secondary Power | If PoE is not available, the Turbine Extended Kit can be powered from a 24-48 VDC local power supply.** |
| Relays | There are two Double Throw relay contacts with 60W switching power. COM, NO, NC contacts are provided. |
| Input/Output | 6 I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
| Audio Line Out | A balanced 600 ohm audio line out with induction loop signal |
Note! Use cables crimped with ferrules for terminal block connectors
- When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
- To make the kit speak its IP address:
- - connect a speaker to the speaker output
- - connect a button to input 1
- - press the button after startup
Power Supply
The Turbine Compact Kit supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. If PoE is not available, the Turbine Compact Kit can be connected to a 24 VDC local power supply.
Network Connection
There is one RJ-45 port located on the Turbine Compact Kit that is used for PoE/LAN Ethernet connection.
Optional Speaker/Microphone connector
Input/Output Connections
There are 6 I/O connection options for the Turbine Compact Kit. These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.
See also Turbine Extended Board Connectors