Actions

Difference between revisions of "Turbine 4.11 - Release notes"

From Zenitel Wiki

(→‎Bugfixes and Improvements - VSF-Turbine 4.9.3.1)
(→‎Bugfixes and Improvements - VSF-Turbine 4.9.3.0)
Line 18: Line 18:
  
 
== Bugfixes and Improvements ==
 
== Bugfixes and Improvements ==
−
 
−
== Bugfixes and Improvements - VSF-Turbine 4.9.3.0 ==
 
−
=== VSIS-1214 Turbine uses SIP over UDP even though configured to use TCP ===
 
−
Turbine sends UDP SIP even though configured to use TCP. Fixed
 
−
 
−
=== SNOW-333 Warning for TCIV as Pulse server===
 
−
New warning added on StationWeb: ''It is recommended not to use TCIV as Pulse server in a systems with more than 5 registered clients. For such systems please use any other Vingtor-Stentofon IP station type, such as TCIS-x, or TKIS-2.''
 
−
 
−
=== SNOW-245 Remove Enable full audio output setting from web===
 
−
The reason this flag was added is because we removed the far end anti clip filter, which caused the station to reboot easily if the received signal was clipped. Now we have enabled anti clip filter and DRC by default - the station will not reboot anymore even if it’s powered from PoE.
 
−
 
−
=== SNOW-244 Expose TFIE-6 menu settings on station web===
 
−
Now all TFIE-6 menu settings are also available on StationWeb.
 
−
 
−
=== SNOW-88 Enable all DAK actions for all Turbine stations===
 
−
All DAK actions are now enabled for all Turbine stations, not filtered anymore by station type.
 
−
 
−
=== MTN-1785 Upgrading stations using Pulse Server not working if TFTP server is on another subnet===
 
−
Fixed.
 
−
 
−
=== MTN-1757 Serial registration method does not display correct status===
 
−
Fixed with displaying proper registration status on StationWeb info Page.
 
−
 
−
=== MTN-1432 TFIE-6 Address book- Dir. number not displayed and entries are not in order ===
 
−
Fixed with showing Dir. number and also added options to order by Dir. number or Label/Name (TFIE-6, TCIS-6, TCIV-6)
 
−
 
−
=== MTN-1236 TCIS-6 Address book does not support national characters===
 
−
Fixed with added support for international non-English characters.
 
−
 
−
=== MTN-618 Turbine station does not send ARP update during startup.===
 
−
Replacing a faulty station with static IP address with an identical configured station must wait for the ARP tables of the switches to timeout before register at AlphaCom. This is now fixed with sending ARP update during startup.
 
−
 
−
=== MTN-408 802.1X config not properly handling special characters in password===
 
−
Characters like !#$%&/()=@* are now handled in the password input field for 802.1x.
 
−
 
−
<br><br>
 
  
 
==Known Issues - VSF-Turbine 4.9.3.1 ==
 
==Known Issues - VSF-Turbine 4.9.3.1 ==

Revision as of 16:15, 9 January 2019

Release info

Name: VSF-Turbine
Description: VSF-Turbine is a firmware archive for all Turbine Family Intercom stations including devices: TCIS-x, TKIS-2, TCIV-x, TMIS-x, TFIE-x, TKIE-x, TFIX-x, ECPIR-3P, ENA-2060AC (only in SIP mode), Exigo IP speakers and Exigo Network Amplifiers (AlphaCom mode only).
Version: The firmware is delivered in two different ZIP archives:

  • vsft-4.11.2.x - Used for standard in-field upgrades
  • vsft-prod-4.11.2.x - Used in production- and recovery upgrades.

Version: 4.11.2.5
Date: 15.01.2019
Status: Limited Availability

VSF-TURBINE 4.11.2.5

New Features - Turbine Intercom

New Features - Exigo Network Amplifiers

Technical Preview

Bugfixes and Improvements

Known Issues - VSF-Turbine 4.9.3.1

VSIS-878 Factory reset does not delete uploaded Script

All uploaded scripts should also be removed on Factory reset

MTN-1964 Tone volume not working for tone test

There was an error in the tone test that caused the Tone volume to be ignored. The Tone volume was always equal to the speaker volume.

MTN-2073 Turbine Sound detection (VAD) does not trigger correctly

Minimum Amplitude setting under the Turbine Sound Detection setting doesn't take effect. Reboot Main Application or System reboot doesn't have any effect.



Known Issues - VSF-Turbine 4.9.3.0

MTN-598 IP station fails to register if Hebrew name is too long

More than 12 characters entered causes registration problems

MTN-1077 Lamp test not functioning on ECPIR-3P and belonging EBMDR-8

Alphacom DAK Lamp test (feature 7874) not implemented on DAK Panel ECPIR-3P and belonging EBMDR-8

MTN-1073 Group call fails if system previously configured with ZAP

If system was configured with ZAP (VS-IMT Pulse SDK project) and then switched to XML configuration by deleting data.lua file, it is possible that Group Calls shall not work. A workaround is that (1) data.lua file is deleted from all stations including Pulse server - this will reboot stations, and (2) after reboot go to Server configuration -> Save + Apply - this will again reboot all stations.

MTN-268 Relay follow M-key cannot handle quick M

Relay configured to follow M-key does not handle quick press on M-key

MTN-1503 Changing the Detailed Logging setting disables syslog logging

If Detailed Logging is enabled or disabled, the syslog functionality doesn't work - Turbine log messages do not arrive on the syslog server. Workaround: Changing Log level setting for syslog will enable the syslog logging again

VSIS-878 Factory reset does not delete uploaded Script

All uploaded scripts should also be removed on Factory reset

SNOW-579 TFIE-6 does not display AlphaCom status-messages in Idle

There is no way of knowing if a TFIE-6 is for example forwarded(71,72) or marked absent(77x). Workaround: During commissioning it is possible by Class Of Service programming in AlphaCom to deny access to these services for the TFIE-6

Retrieved from "https://wiki.zenitel.com/w/index.php?title=Turbine_4.11_-_Release_notes&oldid=195967"