Turbine 4.11 - Release notes
From Zenitel Wiki
Contents
- 1 Release info
- 2 VSF-TURBINE 4.11.2.5
- 2.1 New Features - Turbine Intercom
- 2.2 New Features - Exigo Network Amplifiers
- 2.3 Technical Preview
- 2.4 Bugfixes and Improvements
- 2.5 Known Issues
- 2.6 Known Issues - VSF-Turbine 4.9.3.0
- 2.6.1 MTN-598 IP station fails to register if Hebrew name is too long
- 2.6.2 MTN-1077 Lamp test not functioning on ECPIR-3P and belonging EBMDR-8
- 2.6.3 MTN-1073 Group call fails if system previously configured with ZAP
- 2.6.4 MTN-268 Relay follow M-key cannot handle quick M
- 2.6.5 MTN-1503 Changing the Detailed Logging setting disables syslog logging
- 2.6.6 VSIS-878 Factory reset does not delete uploaded Script
- 2.6.7 SNOW-579 TFIE-6 does not display AlphaCom status-messages in Idle
Release info
Name: VSF-Turbine
Description: VSF-Turbine is a firmware archive for all Turbine Family Intercom stations including devices:
TCIS-x, TKIS-2, TCIV-x, TMIS-x, TFIE-x, TKIE-x, TFIX-x, ECPIR-3P, ENA-2060AC (only in SIP mode), Exigo IP speakers and Exigo Network Amplifiers (AlphaCom mode only).
Version: The firmware is delivered in two different ZIP archives:
- vsft-4.11.2.x - Used for standard in-field upgrades
- vsft-prod-4.11.2.x - Used in production- and recovery upgrades.
Version: 4.11.2.5
Date: 15.01.2019
Status: Limited Availability
VSF-TURBINE 4.11.2.5
New Features - Turbine Intercom
New Features - Exigo Network Amplifiers
Technical Preview
Bugfixes and Improvements
Known Issues
Known Issues - VSF-Turbine 4.9.3.0
MTN-598 IP station fails to register if Hebrew name is too long
More than 12 characters entered causes registration problems
MTN-1077 Lamp test not functioning on ECPIR-3P and belonging EBMDR-8
Alphacom DAK Lamp test (feature 7874) not implemented on DAK Panel ECPIR-3P and belonging EBMDR-8
MTN-1073 Group call fails if system previously configured with ZAP
If system was configured with ZAP (VS-IMT Pulse SDK project) and then switched to XML configuration by deleting data.lua file, it is possible that Group Calls shall not work. A workaround is that (1) data.lua file is deleted from all stations including Pulse server - this will reboot stations, and (2) after reboot go to Server configuration -> Save + Apply - this will again reboot all stations.
MTN-268 Relay follow M-key cannot handle quick M
Relay configured to follow M-key does not handle quick press on M-key
MTN-1503 Changing the Detailed Logging setting disables syslog logging
If Detailed Logging is enabled or disabled, the syslog functionality doesn't work - Turbine log messages do not arrive on the syslog server. Workaround: Changing Log level setting for syslog will enable the syslog logging again
VSIS-878 Factory reset does not delete uploaded Script
All uploaded scripts should also be removed on Factory reset
SNOW-579 TFIE-6 does not display AlphaCom status-messages in Idle
There is no way of knowing if a TFIE-6 is for example forwarded(71,72) or marked absent(77x). Workaround: During commissioning it is possible by Class Of Service programming in AlphaCom to deny access to these services for the TFIE-6