View source for INCA Video Desk Station LED Indicators

=Station LED=
LED4 - Red 5mm LED on board rear side, also seen through front plate.
[[File:IPDeskLED.png|left|thumb|200px|Station LED]]
<br style="clear:both;" />
'''Blinking at 1 second intervals:'''<br/>
Station has no connection to the ICX-AlphaCom Server.

Possible reasons:
* No connection to Ethernet 
* Wrong AlphaCom IP address configured 
* Invalid IP address 
* No gateway or wrong gateway to the ICX-AlphaCom Server

'''Blinking at 5 second intervals:'''<br/>
Station connected but NOT registered in the ICX-AlphaCom Server. 

Possible reasons: 
* Station has not been programmed in AlphaPro
* Missing IP Station license in ICX-AlphaCom Server

'''No blinking:'''

Possible reasons: 
* Station connected and registered to the ICX-AlphaComo Server
* Station not powered up (if no other LEDs are active)

=Display Color Bar=
In the LCD display there is a bar color indicating the connection status:
* '''<span style="color: Orange">Yellow</span>''' indicates that the IP Desktop Station is connected to the server.
* '''<span style="color: Green">Green</span>''' indicates an active, incoming or outgoing call.
* '''<span style="color: Red">Red</span>''' indicates that no network connection can be established. If an Ethernet cable is connected the IP Video Display should connect automatically during start up.
* '''<span style="color: Orange">Yellow</span>-<span style="color: Red">Red</span>''' flashing indicates that no connection to the server can be established. If the server and the IP Desktop Station is configured correctly the connection is established automatically during start up. (May take some time)

[[Category:Station Indication LEDs]]