View source for IMT - Basic Intercom System Setup

{{AEIPS}}
[[File:IMT1.png|thumb|right|500px]]

== Overview ==
The procedure for deploying IP-intercom stations is
# Planning your system
# Discovery of intercom devices
# Identification of intercom devices and assigning a directory number
# Software upgrade
# Configuration
# Verifying configuration
A Wizard will guide you through the procedure.

== Planning the installation ==
Plan your installation by collecting configuration data you would need to setup your system.

=== Planning an AlphaCom Installation ===
The table below is an example of data you would need for a typical AlphaCom IP intercom installation.

'''AlphaCom system parameters'''
{| class="wikitable"
!Parameter
!Value
|-
|Station mode
|AlphaCom
|-
|AlphaCom site 1
|10.4.2.2
|-
|IP gateway site 1
|10.4.2.1
|-
|IP address range site 1
|10.4.2.x
|-
|IP network mask site 1
|255.255.255.0
|-
|AlphaCom site 2
|10.7.2.2
|-
|IP gateway site 2
|10.7.2.1
|-
|IP address range site 2
|10.7.2.x
|-
|IP network mask site 2
|255.255.255.0
|}
'''AlphaCom system intercom information'''

{| class="wikitable"
!Dir. No.
!Name
!Location (Site)
!IP configuration
!MAC-address *
!Host name
!Other
|-
|101
|Hans
|B1, F1, R1
|10.4.2.7
|00:13:CB:01:5F:27
|Zenitel-101
| 
|-
|102
|Thomas
|B1, F1, R2
|10.4.2.8
|00:13:CB:06:01:4C
|Zenitel-102
| 
|-
|103
|Front door
|B1, Main Entrance
|10.4.2.9
|00:13:CB:00:AA:38
|Zenitel-103
|Noisy environment
|-
|104
|Back door
|B1, Back Door
|10.4.2.10
|00:13:CB:00:1B:CA
|Zenitel-104
| 
|-
|201
|Emil
|B2, F3, R6
|DHCP
|00:13:CB:01:5F:28
|DHCP
| 
|-
|202
|Frano
|B2, F3, R8
|DHCP
|00:13:CB:06:01:45
|DHCP
| 
|-
|203
|Lab
|B2, Lab Entrance
|DHCP
|00:13:CB:00:AA:39
|DHCP
| 
|-
|204
|Datacenter
|B2, Data Center
|DHCP
|00:13:CB:00:1B:CE
|DHCP
| 
|}
''*Note that you don’t need to obtain all the MAC addresses upfront. The AlphaCom directory report from the Discovery Wizard Finish step has MAC addresses in the directory list.''

=== Planning a Pulse Installation ===
The tables below are examples of data you would require for a typical Pulse system installation.

'''Pulse system parameters'''
{| class="wikitable"
!Parameter
!Value
|-
|Station mode
|Pulse
|-
|Server site
|192.16.8.29
|-
|IP gateway site
|192.16.8.1
|-
|IP address range site
|192.16.8.x
|-
|IP network mask site
|255.255.255.0
|}
'''Pulse system intercom information'''
{| class="wikitable"
!Dir. No.
!Name
!Location (Site)
!IP configuration
!MAC-address
!Host name
!Other
|-
|101
|Reception
|Reception
|192.16.8.29
|00:13:cb:00:32:d0
|Flush Master
|IP Master Station
|-
|102
|John Smith
|Head Office
|DHCP
|00:13:cb:02:5d:94
|Desk Master
|IP Desktop Station
|-
|103
|Peter Brink
|Head Office
|DHCP
|00:13:cb:02:5c:8e
|Desk Master
|IP Desktop Station
|-
|201
|Entrance
|Main Entrance
|DHCP
|00:13:cb:06:3a:3e
|TCIV-3
|IP Substation
|-
|202
|Elevator
|Main Hall
|DHCP
|00:13:cb:08:00:fe
|TMIS-1
|IP Substation
|-
|301
|Office 1
|1st floor
|DHCP
|00:13:cb:06:of:9e
|TCIS-5
|IP Substation
|-
|302
|Office 2
|2nd floor
|DHCP
|00:13:cb:06:2a:54
|TCIS-4
|IP Substation
|-
|303
|Office 3
|3rd floor
|DHCP
|00:13:cb:06:06:22
|TCIS-6
|IP Substation
|}

=== Planning a SIP Installation ===
The tables below are examples of data you would require for a typical SIP IP intercom installation.

'''SIP system parameters'''
{| class="wikitable"
!Parameter
!Value
|-
|Station mode
|SIP
|-
|Server site
|192.16.8.100
|-
|IP gateway site
|192.16.8.1
|-
|IP address range site
|192.16.8.x
|-
|IP network mask site
|255.255.255.0
|}

'''SIP system intercom information'''
{| class="wikitable"
!Dir. No.
!Name
!Location (Site)
!IP configuration
!MAC-address
!Host name
!Other
|-
|101
|Reception
|Reception
|192.16.8.29
|00:13:cb:00:32:d0
|Flush Master
|IP Master Station
|-
|102
|John Smith
|Head Office
|192.16.8.18
|00:13:cb:02:5d:94
|Desk Master
|IP Desktop Station
|-
|103
|Peter Brink
|Head Office
|192.16.8.19
|00:13:cb:02:5c:8e
|Desk Master
|IP Desktop Station
|-
|201
|Entrance
|Main Entrance
|192.16.8.32
|00:13:cb:06:3a:3e
|TCIV-3
|IP Substation
|-
|202
|Elevator
|Main Hall
|192.16.8.34
|00:13:cb:08:00:fe
|TMIS-1
|IP Substation
|-
|301
|Office 1
|1st floor
|192.16.8.35
|00:13:cb:06:of:9e
|TCIS-5
|IP Substation
|-
|302
|Office 2
|2nd floor
|192.16.8.36
|00:13:cb:06:2a:54
|TCIS-4
|IP Substation
|-
|303
|Office 3
|3rd floor
|192.16.8.39
|00:13:cb:06:06:22
|TCIS-6
|IP Substation
|}

== Station Discovery and Upgrade Wizard ==
Once the system has been planned it is time to start VS-IMT and run the [[IMT - Station Wizard|Wizard]].

* [[IMT - Discover Stations]]
* [[IMT - Identify Stations]]
* [[IMT - Discover & Upgrade]]
* [[IMT - Configure Zenitel Devices]]
* [[IMT - Review Results]]

[[Category:IMT]]