View source for Turbine+ series board connectors

{{AEIS}}
[[File:TurbinePlusBoardConnections.png|thumb|left|800px|Turbine+ connectors]]
<br clear=all/>

{| border="1" }
| align="center" style="background:#ffd400;" |'''Item'''
| align="center" style="background:#ffd400;" |'''Description'''
| align="center" style="background:#ffd400;" |'''''Comment'''''
|-
| 1 || USB Port || Used only during production process, or for recovery.
|-
| 2 || Relay || NO/NC relay.
|-
| 3 || I/O interface|| 5.3V (200mA max) output and GND, and 6 x I/O connectors . Typically used as digital input (eg. from a closing contact) or digital output (12mA LED driver).
|-
| 4 || Line Output || 600 ohm balanced line out. For sending audio to 3rd party devices.
|-
| 5 || Speaker Output || Connection for 8Ω external speaker (relevant for [[TKIV+]] kit)
|-
| 6 || Microphone Input || Connection for electret microphone (relevant for [[TKIV+]] kit)
|-
| 7 || Power Input || 24 VDC for external secondary power if PoE/PoE+ is not available. Pin 1 is positive.
|-
| 8 || Network Port || 10/100/1000Mbps RJ-45 port connecting to Ethernet. PoE/PoE+ is supported.
|-
| 9 || SD-card slot || SD Card slot planned for future use. Currently not in use.
|-
|}


{{Note| 
* Relay switching capacity: Max. 60 watt (Max voltage: 250VAC/220VDC. Max current: 2A)
* Connectable conductors:  0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².
* The 5,3V output can deliver 200mA current maximum}}
<br clear=all/>



[[Category: Turbine Connections]]