View source for LED control (VS-Operator)

{{AI}}
This article shows how to configure the "LEDs" in the Button Matrix in [[VS-Operator]]. By this configuration the LED behavior will be flashing Red at Call Request, and steady green during Conversation.

Configuration is required in the VS-Operator Client only. No configuration is required in AlphaCom.

=== Configure DAK buttons ===
In the '''Button matrixes''' menu, define the button like this:
* '''Button kind''' = DAK
* '''Button ID''' = The directory number programmed on the actual DAK key in AlphaCom
* '''Button DAK''' = the DAK key number (1-100)

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:DAK Matrix LED.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Configuring buttons as DAK keys</td>
</tr>
</table>


=== Define Filter Sets ===
====Define a Filter Set called "OperatorFilter"====
* In VS-Operator, System Configuration, select '''Filter sets''' (1) > '''Add''' (2) > '''Station''', and enter the name ''OperatorFilter'' (3). 
* Select '''On Connect''' (4), and check "Script" (5). 
* Add the following script (6):
{{Code3|
 App.SetButtonLEDState("%DIRB", LEDKind.Left, LEDState.On, Color.Green, Color.Transparent); 
 App.SetButtonLEDState("%DIRA", LEDKind.Left, LEDState.On, Color.Green, Color.Transparent); 
}}
* Select '''Test''' (7), then '''OK''' (8) to save. (Note that if pressing "OK" without having done "Test" first, the script will not be saved!).

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:AV OperatorFilter.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Creating the "OperatorFilter" - OnConnect script</td>
</tr>
</table>

* Select '''On Disconnect''' (1), and check "Script" (2). 
* Add the following script (3):
{{Code3|
 App.SetButtonLEDState("%DIRB", LEDKind.Left, LEDState.Off, Color.Transparent, Color.Transparent); 
 App.SetButtonLEDState("%DIRA", LEDKind.Left, LEDState.Off, Color.Transparent, Color.Transparent); 
}}
* Select '''Test''' (4), then '''OK''' (5) to save. (Note that if pressing "OK" without having done "Test" first, the script will not be saved!).

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:AV OperatorFilterDisconn.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Creating the "OperatorFilter" - OnDisconnect script</td>
</tr>
</table>


====Define a Filter Set called "RemoteFilter"====
* In VS-Operator, System Configuration, select '''Filter sets''' (1) > '''Add''' (2) > '''Station''', and enter the name ''RemoteFilter'' (3). 
* Select '''On Call Request Add''' (4), and check "Script" (5). 
* Add the following script (6):
{{Code3|
 App.SetButtonLEDState("%DIRA", LEDKind.Right, LEDState.Fast, Color.Red, Color.White);  
}}
* Select '''Test''' (7), then '''OK''' (8) to save. (Note that if pressing "OK" without having done "Test" first, the script will not be saved!).

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:AV RemoteFilterCRAdd.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Creating the "RemoteFilter" - On Call Request Add script</td>
</tr>
</table>

* Select '''On Call Request Remove''' (1), and check "Script" (2). 
* Add the following script (3):
{{Code3|
 App.SetButtonLEDState("%DIRA", LEDKind.Right, LEDState.Off, Color.Transparent, Color.Transparent);  
}}
* Select '''Test''' (4), then '''OK''' (5) to save. (Note that if pressing "OK" without having done "Test" first, the script will not be saved!).

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:AV RemoteFilterCRRemove.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Creating the "RemoteFilter" - On Call Request Remove script</td>
</tr>
</table>

=== Assign the Filter Set to stations ===
Select the '''Devices''' menu, select the VS-Operator associated station, and assign it to "OperatorFilter".

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:AV AddFilterOp.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Assign the Operator station to the "OperatorFilter"</td>
</tr>
</table>

Select the '''Devices''' menu, select the calling substation, and assign it to "RemoteFilter".

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:AV AddFilterSub.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Assign the substation to the "RemoteFilter"</td>
</tr>
</table>


Now there should be RED flashing LED at Call Request, and steady green during conversation.

[[Category: Zenitel Operator - Configuration examples]]