View source for Cisco Call Manager 10 configuration

{{S}}This article describes how to add a Stentofon Intercom station to Cisco Unified Call Manager 10.
<br>
Please note that this is the minimum configuration to get a Turbine station successfully registered to a Cisco Call Manager. 
<br>
Adjust needed parameters to fit your configuration. 

'''Turbine stations does not support VLAN tagging or CPD, so please ensure that the station is connected to an access port!'''

=Configuring Cisco Call Manager=
The first step is to add an end user to associate with the Intercom Station, then add the phone hardware and configure extension number. 
==Add new End User==
'''User Management -> End User -> Add New'''
[[Image:cucm10_adduser.png|thumb|left|500px|SIP Intercom Configuration - Add new End User]]
<br>
{| class="wikitable"
|-
|User ID
|The user ID of the station user. This value must be entered under auth name on the Turbine station.
|-
|Password
|User password. _NOT_ the same as SIP auth password. 
|-
|Digest credentials
|If digest authentication is enabled in the SIP security profile, this value will be used as SIP password. 
|-
|}
<br style="clear:both;" />
==Add new Phone==
'''Device -> Phone -> Add New'''
[[Image:cucm10_addphone.png|thumb|left|500px|SIP Intercom Configuration - Add new Phone]]
<br>
- Phone Type: Third-Party SIP Device (Basic)<br><br>
Press Next
<br style="clear:both;" />
 '''Note!'''
 If you are using TCIV and want video functionality (Not officially supported) you must use Third-Party SIP Device (Advanced), as Basic does not allow video.

[[Image:phone_config_1.png|thumb|left|500px|SIP Intercom Configuration - Add new Phone]]
<br>
{| class="wikitable"
|-
|MAC-Address
|Intercom station MAC address
|-
|Description 
|Optional description (Autocompletes)
|-
|Device Pool
|Your configured device-pool. 
|-
|Phone Button Template
|Third-Party SIP Device (Basic)
|-
|Calling Search Space
|Your configured Calling Search Space.
|-
|Media Resource Group List
|Your configured Media Resource Group List
|-
|Owner User ID
|Select the End User we configured in previous step
|-
|}
<br style="clear:both;" />

[[Image:phone_config_2.png|thumb|left|500px|SIP Intercom Configuration - Add new Phone]]
<br>
{| class="wikitable"
|-
|Device Security Profile
|Third-Party SIP Device Basic - Standard Non-secure profile*
|-
|SIP Profile
|Standard SIP Profile
|-
|Digest User
|Select the End User we configured in previous step. 
|-
|}
<br style="clear:both;" />


 '''Note!''' 
 *This guide uses a security profile without digest authentication. If you want username/password authentication on the Intercom station you must create a secure SIP profile with digest authentication. 



<br style="clear:both;" />

[[Image:phone_config_add_dn.png|thumb|left|500px|SIP Intercom Configuration - Add new Phone]]
<br>
- In the upper left corner, press "Line [1] - Add a new DN". 
<br style="clear:both;" />
[[Image:phone_config_add_dn2.png|thumb|left|500px|SIP Intercom Configuration - Add new Phone]]
<br>
{| class="wikitable"
|-
|Directory number
|Enter wanted directory number
|-
|Route Partition 
|Your configured Route Partition
|-
|Calling Search Space
|Your configured Calling Search Space
|-
|}

- Press Save
- Press Save/Restart
<br style="clear:both;" />


=Configuring the Stentofon SIP Intercom=
==SIP Account settings==
<br>
'''Please note that if configuring device to use multiple SIP servers, it is recommended to review [[SIP_intercom_registration_methods | Registration method]]

[[Image:turbine_cucm_config_1.png|thumb|left|500px|Turbine SIP configuration]]
<br>
{| class="wikitable"
|-
|Display Name
|Optional
|-
|Directory Number (SIP ID)
|The configured DN the station is using. 
|-
|Server Domain
|IP-address of Cisco Call Manager server
|-
|Registration method
|Preferred registration method. If multiple servers choose serial.
|-
|Authentication Username
|Username of the End user associated with the phone. (Digest user) 
|-
|Authentication Password
|Digest password configured on the End User. Note that Digest Authentication on the CUCM must be enabled if using this. 
|-
|Register Interval
|How often the Turbine should send SIP register. 
|-
|}
<br style="clear:both;" />


[[Category: SIP intercom - iPBX integrations]]
[[Category: SIP intercom - Configuration]]