View source for EBMDR-8

{{AEIPS}}[[File:EBMDR-8-newZ.png|thumb|250px|The EBMDR-8 Expansion Module]]
The EBMDR-8 Expansion Module is a slave unit to the [[ECPIR-3P]] and to the [[ECPIR-P]] Call Panels. The EBMDR-8 hence receives power from and communicates through its master, the ECPIR-P/ECPIR-3P.
==Highlights==
* Button expansion module for Call Panels [[ECPIR-P]] and [[ECPIR-3P]]
* Powered from master Call Panel
* Eight programmable buttons with individual labels and status indicators
* Optional button protection covers
* Four units can be connected to one Call Panel (ICX-AlphaCom, AlpaCom XE, SIP, Edge, Pulse)
* No additional licenses required for the expansion module (AlphaCom 11.5.3.3 or later, Turbine 4.7 and later)

==Exigo Button Expansion Module EBMDR-8==
The EBMDR-8 button module features eight fully programmable buttons.

Up to four EBMDR-8 modules may be daisy-chained to one ECPIR giving maximum 35 programmable buttons. 

# Power off the ECPIR station by disconnecting the ethernet cable or the external power supply. 
# Using the small connection cable supplied, connect the EBMDR-8 expansion module to the ECPIR or preceding module as shown in the figure.
# Connect the white connector on the cable to the corresponding white connector on the ECPIR or preceding EBMDR-8.
# Connect the black connector on the cable to the corresponding black connector on the EBMDR-8.

[[Image:ecpir3p_embdr8.png|thumb|left|600px|EMDBR-8 connection to ECPIR ]]
<br style="clear:both;" />

== Configuration ==
* [[EBMDR-8 - Configuration]] (AlphaCom)
* [[Direct Access Key & Ringlist Settings (Pulse)]]
* [[Direct Access Key & Ringlist Settings (SIP)]]

==Related articles==
* [[ECPIR-3P|ECPIR-3P - 1023200033]]
* [[EMBR-1|EMBR-1 Mounting Box - 1023595010]]
* [[EMBR-2|EMBR-2 Mounting Box - 1023595020]]
* [http://www.zenitel.com/product/ebmdr-8 Additional Documentation on Zenitel.com]

[[Category: Turbine Backboxes and accessories]]