View source for ECP-AA1 Connections

{{AEIPS}}
The ECP-AA1 has 2 connectors located at the bottom of the unit.

==Power==
The ECP-AA1 is powered through the Ethernet connector via Power over Ethernet (PoE). 

The Ethernet connector is located at the bottom of the unit:

[[File:ECP-AA1 Connectors.png|left|thumb|ECP-AA1 Bottom view]]
<br style="clear:both;" />

==Ethernet connector==
Type: M12, D-coded, Female, 4-pin
[[File:ECP-AA1 Connector1.png|left|thumb]]

{| border="1"
|-
|1||TD+
|-
|2||RD+
|-
|3||TD-
|-
|4||RD-
|}
<br style="clear:both;" />

==I/O connector==
Type: M12, A-coded, Fermale, 8-pin
[[File:ECP-AA1 Connector2.png|left|thumb]]

{| border="1"
|-
|1||+5V DC
|-
|2||GND
|-
|3||I/O 1
|-
|4||I/O 2
|-
|5||I/O 3
|-
|6||Relay - common
|-
|7||Relay - NC
|-
|8||relay - NO
|}

==Connection to Emergency Break==
The emergency brake provides a clean contact to the ECP-AA1. Its purpose is so that an emergency call is made as soon as the emergency brake handle is operated.

<u>'''Procedure'''</u>

*Connect the clean contact between pins 2 and 3 on the I/O connector.

==Connection to CCTV System==
The ECP-AA1 provides a clean contact to the CCTV system. Its purpose is to send a trigger to the CCTV system when a call is made from the ECP-AA1.

<u>'''Procedure'''</u>

*Connect the CCTV trigger input between pins 6 and 8 on the I/O connector.

==Related==
[[Turbine Compact series board connectors]]

[[Category: Turbine Connections]]