View source for Event Viewer - Config File Configuration

{{L}}
1.Click Configure > New Device

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Event Viewer - ADDING A NEW DEVICE.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Adding new device/devices to Event Viewer</td>
</tr>
</table>

2. Export the VIPA Configuration from the SCT Tool

*If you do not have a separate VIPA .cfg configuration file already, you can extract one from the SCT:
*Open the SCT and select File > Export VIPA configuration and save the .cfg file to a known location on you host PC.

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:VIPEDIA NM EXPORTING VIPA CONFIG.png|200px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Exporting The VIPA Configuration</td>
</tr>
</table>


3. Click "Browse to PAVA VIPA config file" to understand how to extract the VIPA configuration from the SCT please refer to the [[Vipedia-NET NetworkCardManager|NetworkCardManager page.]]

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Event Viewer - Browsing PAVA Config File.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Clicking "Browse to PAVA VIPA config file" </td>
</tr>
</table>

4.Select the extracted VIPA configuration > Open

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Event Viewer - Opening VIPA Config.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Opening VIPA Configuration in Event Viewer</td>
</tr>
</table>

5. Click on the device/devices you wish to monitor > Add Selected Devices

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Event Viewer - Adding Selected Devices.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Adding selected device/devices</td>
</tr>
</table>

6. Upon successful connection to the device/devices, they should say Online: and highlight green under "Monitored Devices" > Save Changes

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Event Viewer - Successful Connection to Device.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Entering IP address and hostname of device/devices to be monitored</td>
</tr>
</table>

7. Once the changes have been saved, you should be able to close the Configuration window and Event Viewer should begin monitoring the device/devices.