View source for INCA DualDisplay Station LED Indicators

====Station LED====
[[File:IPDualDisplayLED.png|left|thumb|200px|Station LED]]
<br style="clear:both;" />
'''Blinking at 1 second intervals:'''<br/>
Station cannot register to the server/controller

Possible reasons:
* Invalid network settings (IP address and network mask) in the device
* Wrong or missing account settings (Server IP, directory number, password..)
* Failing to register due to missing license in the server
* The server is offline
* Network or Server firewall is not blocking port 50001 (ICX-AlphaCom) or 5060 (Edge/SIP)
If the server is on a different subnet, check that
* A valid Default gateway is defined

'''No blinking:'''

Possible reasons: 
* Station connected and registered to the server/controller
* Station not powered up (if no other LEDs are active)

'''Blinking at 5 second intervals:'''<br/>
{{Note| This LED behaviour only applies in ICX-AlphaCom mode}}
Station connected but NOT registered in the ICX-AlphaCom

Possible reasons: 
* Station has not been programmed in AlphaPro
* Missing IP Station license in ICX-AlphaCom

[[Category:Station Indication LEDs]]