View source for INCA Station Restore Factory Defaults

{{APS}} 
== Applicable for stations ==
* IP Substations - [[Weather and Vandal Resistant IP Substation - 1008041100|1008041100]]/[[Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000|1008051000]]
* IP Video Door Stations - [[IP Video Door Station - 1401110100|1401110100]]/[[IP Video Door Station - 1401110200|1401110200]]
<div style="text-align:left;"> <youtube width="300" height="180">W_YbTuXvr1w</youtube>  </div>
<br>
<div style="text-align:left;"> <youtube width="300" height="180">bJhq8uyTP24</youtube>  </div>


==Procedure ==
When loading factory defalt settings, the unit can be set to use either '''Static IP''' or '''DHCP'''. 
[[File:Load Defaults without Display - 1.PNG|thumb|right|200px]]

[[File:Load Defaults without Display - 2.PNG|right|thumb|200px]]
# While pressing the call button, power up the station and keep the button pressed.
# Release the button '''after exactly 2 flashes''' of the LED.
# Let the LED flash for '''exactly 2 more times''' (Static IP) or '''exactly 4 more times''' (DHCP), then press the button again.
# Keep the button pressed until the LED '''flashes fast 2 time'''s (Static IP) or '''flashes fast 4 times''' (DHCP) indicating a successful reset.
# Release the button and the station will restart with the factory default settings.
<br>

== Factory default values ==
*Station Mode: '''Pulse'''
*Station IP address: '''169.254.1.100''' (Static) or '''DHCP'''
*Username: '''admin'''
*Password: '''alphaadmin'''



{{note| Software 01.06 and earlier: Username/password is '''ADMIN/alphacom''' }}

[[Category: INCA - Restore Factory Defaults and Software Upgrade]]