View source for IP Station Configuration - Pulse mode

{{P}}

== Set up Pulse System from start ==
If you need to set up a Pulse System from start, including the Pulse Server, see [[Pulse System Configuration]].

== Add a station to an existing Pulse system ==
If there is a [[Pulse Server]] already on the network, the Pulse Server will [[Station auto-discovery and Configuration (Pulse)|automatically detect]] new stations connected to the network. There is normally no need to do any configuration in the new station itself.
[[File:Pulse Turbine Directory.PNG|thumb|right|500px|Configuring the Directory Settings in the Pulse Server]]
Follow these steps to add a new station to an existing Pulse System:
# Connect the new IP Station to the network. Stations are by default set to operate in Pulse Mode. If not sure, you can do a factory default of the station
# Wait for the station to boot up (approximately 60 seconds). When the station has started up, the [[Pulse Server]] will automatically discover the station. 
# [[Logging into an IP Station|Log on to the '''Pulse Server''' station]] (not to the new station!)
# Select '''Server Management''' > '''Server Configuration''' > '''Directory Settings'''. The new station should now appear in the station list of the Pulse server
# To identify the station,  click '''Play'''. You will now hear a tone in the loudspeaker of the station you selected.
# Enter '''Directory number''', '''Name''' and '''IP address''' for the station. You can choose to use a static IP address or to obtain IP address from a DHCP server.
# Click '''Save''' to push the new settings to the stations, and  '''Apply''' to do a required system reboot.

{{obs|It is recommended not to use TCIV (Turbine station with camera) as Pulse server in a system with more than 5 registered clients. For such systems please use any other Vingtor-Stentofon IP station type, such as TCIS-x, or TKIS-2. }}




[[Category: Turbine Configuration]]
[[Category: Pulse - Configuration]]
[[Category: INCA Station Configuration Guide]]