View source for Milestone XProtect - Adding ONVIF compliant Zenitel devices

{{AEIS}}
This guide describes the process of adding Zenitel devices to Milestone XProtect. It is assumed that Milestone XProtect has already been setup and is operational and the user is familiar with the operation.

=== Supported Devices ===
====Video Intercoms====
*Turbine Video intercom and kit: TCIV+
*Turbine Video kit: TKIV+
* Turbine  Video intercom TCIV (obsolete)

====Non-Video Intercoms====
* Turbine Compact series TCIS
* Turbine Industrial series TFIE
* Turbine kits TKIE and TKIS
* EX intercoms series TFIX
* V2 Master Stations
* IP Speakers

=== Pre-requisites ===
* VS-IS 6.4.3.0 must be installed in the Zenitel Device
* The latest XProtect Device Pack must be installed.

=== Configuration in the Zenitel Devices ===
Additional ONVIF configuaration is available from the [[ONVIF_Settings#Video_Intercoms|Web Interface]] of the device:
* To receive information about Call Button pressed, "'''Report DAK as Digital Input in ONVIF'''" option must be enabled in the Zenitel device prior to discovery.
* To receive information about Station Call Events (In Conversation, Ringing, In call queue), the "'''Report station events as Digital Input in ONVIF'''" must be enabled in the Zenitel device prior to discovery.

=== Add and configure Zenitel device ===
* Open Milestone XProtect Management Client
* To add new camera devices, select '''Recording Servers''', choose current PC, right-click and '''Add Hardware..'''.

[[Image:recordingserver.JPG|thumb|left|500px|Add Hardware...]]
<br style="clear:both;" />


In the '''Add Hardware''' wizard, there are different options on how add devices. 
* Use '''Express''' method for ONVIF WS-discovery of Zenitel stations.
* Alternatively, you can choose '''Manual''' to add the Zenitel station if you already know its IP address.

[[Image:addhardware1.JPG|thumb|left|500px|Add Hardware wizard]]
<br style="clear:both;" />

* Under Protocol, select HTTP (unsecure)
* '''Add''' a new line and edit the credentials to match the default credentials admin & alphaadmin. Then press '''Next'''.

[[Image:Addhardware2.JPG|thumb|left|500px|Enter TCIV credentials]]
<br style="clear:both;" />

* Press '''Next''', and discovery will start and it will find the device.

[[Image:addhardware3.JPG|thumb|left|500px|List of detected devices]]
<br style="clear:both;" />

* Press '''Next''', and Milestone will discover the camera, audio and I/O on the device.

[[Image:addhardware4.JPG|thumb|left|500px|List of detected devices]]
<br style="clear:both;" />

* Press '''Next''', and you can enable additional "devices", such as microphone or relay.

* If you want to '''receive audio''' from the device, ensure that '''Microphone''' option is Enabled.
* If you want to '''send audio''' from the device, ensure that '''Speaker''' option is Enabled.
* If you want the ability to '''receive inputs''' of the device, ensure that '''Input''' option is Enabled.
* If you want the ability to '''operate relay''' of the device, ensure that '''Output''' option is Enabled.

[[Image:addhardware5.JPG|thumb|left|500px|Enable audio and/or I/O if required]]
<br style="clear:both;" />

* The devices must be added to a group for it to be selectable. 
* Select a device group which was previously defined; if no group has been defined yet, define a group.

[[Image:addhardware6.JPG|thumb|left|500px|Add the camera to a group]]
<br style="clear:both;" />

<br>

=== Further Information ===
[[ONVIF Settings]]


[[Category:Video]]
[[Category:ONVIF]]
[[Category:3rd party integration]]