View source for Router Dynamic Tool - RDT

{{L}}[[file:Audio Output Levels Within RDT1.png|thumb|700px| All Inputs/Output Display Mode – Inputs Page]]
The RDT is launched from within the PAVA SCT tool and enables configuration and commissioning of the dynamic parameters associated with the Vipedia-12 audio router and its peripherals.

==RDT Parameters==

<table style='width:60%;'>
  <tr style='background-color:#ffd400'>
    <td style='border:1px solid; font-weight:bold'>RDT Features</td>
    <td style='border:1px solid; text-align:center;font-weight:bold'>Purpose</td>
  </tr>
<tr>
    <td style='border:1px solid'>VIPEDIA (x) drop down menu</td>
    <td style='border:1px solid; text-align:left;'>If there are multiple Vipedia-12 units within the SCT Cluster, This feature will allow you to select and configure them individually</td>
  </tr>
  <tr>
    <td style='border:1px solid'>Accept Unit Faults</td>
    <td style='border:1px solid; text-align:left;'>Stops beeping in the prescence of faults within the cluster</td>
  </tr>
<tr>
    <td style='border:1px solid'>Clear Unit Faults</td>
    <td style='border:1px solid; text-align:left;'>Clears any faults currently present in the cluster</td>
  </tr>
<tr>
    <td style='border:1px solid'>Load Unit DVA</td>
    <td style='border:1px solid; text-align:left;'>Where DVA Messages are loaded onto the Vipedia</td>
  </tr>
<tr>
    <td style='border:1px solid'>Commit System Settings</td>
    <td style='border:1px solid; text-align:left;'>Save any changes made on the RDT</td>
  </tr>
<tr>
    <td style='border:1px solid'>Rollback System Settings</td>
    <td style='border:1px solid; text-align:;left;'>Settings will be rolled back to previous state</td>
  </tr>
<tr>
    <td style='border:1px solid'>Manage Audio Settings</td>
    <td style='border:1px solid; text-align:left;'>Multiple settings within. These include:
*Read .csv dynamic config from Vipedia
*Write .csv dynamic config to the Vipedia
*Reset the Dynamic settings to factory default
</td>
  </tr>
<tr>
    <td style='border:1px solid'>Inputs</td>
    <td style='border:1px solid; text-align:left;'>Configure audio input parameters such as:
*Muting input
*Adjusting input dB level
</td>
  </tr>
<tr>
    <td style='border:1px solid'>DVA's 1-16, DVA's 33-48, DVA's 49-64</td>
    <td style='border:1px solid; text-align:left;'>Configure the DVA parameters such as:
*Muting certain DVA's
*Adjusting DVA dB level
</td>
  </tr>
<tr>
    <td style='border:1px solid'>Outputs</td>
    <td style='border:1px solid; text-align:left;'>Configure audio output parameters such as:
*Output dB level
*Muting certain outputs
*Adjusting output dB level 
</td>
  </tr>
<tr>
    <td style='border:1px solid'>Global Settings</td>
    <td style='border:1px solid; text-align:left;'>Configuring Vipedia audio output surveillance</td>
  </tr>
</table>

{{Warn|If any changes are made to the Router Dynamic Configuration, Please ensure to Commit System Settings otherwise changes will be lost.}}

==Reading/Writing the Router Dynamic Config==

To ensure dynamic configuration consistency in the event a Vipedia-12 router needs to be swapped out, it is possible to read the current router dynamic config. The resulting back up can then be written to a new Vipedia-12 if required.

===Reading Router Dynamic Config===

*Ensure your preferences are set to the correct laptop adapter which is on the same network as the Vipedia-12:

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Setting Network Connections1.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Selecting Correct Ethernet Adapter</td>
</tr>
</table>

*Click the RDT icon (highlighted with the R symbol) to open the RDT:

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:RDT Location.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>RDT Icon</td>
</tr>
</table>

*Click on Manage Audio Settings > Click Read and save the .csv file a known location.

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Reading RDT Config.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Saving Router Dynamic Config</td>
</tr>
</table>

===Writing Router Dynamic Config===

*Select Write and Commit in the RDT

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Writing Router Dynamic Config.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Writing and Committing the .csv file</td>
</tr>
</table>

*Select the .csv file
*Click Open

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:Router Dynamic Config to Write.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Selecting the .csv file</td>
</tr>
</table>

==Configuring Router Output Surveillance==

1. Navigate to global settings and configure surveillance tone frequency as your requirements.

The default settings for configuring output surveillance from the Vipedia 12 outputs to a V2000 are as follows:

*Under ‘Surveillance Generator 1’ select ‘20Hz’.
*For each V2000 connected output, enable the surveillance tone generation by selecting ‘On’.
*Set the Send Level of each of these outputs to -30dB.
*Figure 5 highlights the relevant sections, with outputs 1 – 12 commissioned as an example.
*Repeat for all VIPEDIA-12 outputs in the PAVA system that have connection to V2000.
*Once all VIPEDIA-12s have been commissioned, click ‘Commit System Settings’.
*This will permanently save the commissioned values into all VIPEDIA-12s.


<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:RDT Output Surveillance2.png|700px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Configuring Output Surveillance via the RDT</td>
</tr>
</table>

*To check you have configured the Router Output surveillance correctly, you can check the Analogue IP (mV) level in the [[Amplifier Dynamic Tool - ADT|ADT.]]

==Loading DVA Messages==

[[Processing audio for use as DVA|*Processing audio for use as a DVA]]













[[Category: Zenitel PAVA]]