View source for ZIPS - Board Connections

This article is applicable to the '''ZIPS IP speaker range''' and the [[ZIPS-kit]] ('''ZIPS-K''' and '''ZIPS-KOE''').
[[File:ZIPS Connections.jpg|thumb|left|500px|ZIPS Circuit Board]]
<br clear=all/>

{| border="1" }
| align="center" style="background:#ffd400;" |'''Item'''
| align="center" style="background:#ffd400;" |'''Description'''
| align="center" style="background:#ffd400;" |'''''Comment'''''
|-
| 1¹ || Relay || COM+NO, 48V nominal, max: 100VDC, 70VAC
|-
| 2¹ || External Speaker|| Connection for 8 ohm loudspeaker.
|-
| 3¹ || Microphone || Electret mic input
|-
| 4¹ || I/O interface||2 general purpose I/Os. Each I/O can be configured either as an input or 12mA LED driver output.
|-
| 5¹ || Auxiliary output || 24 VDC output for external beacon control
|-
| 6¹ || Internal Speaker || Connection for 8 ohm loudspeaker.
|-
| 7 || LAN Port || 10/100Mbps RJ-45 port for Ethernet connection. PoE is supported.
|-
|}



{{Note|¹) Connectable conductors:  0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².}}

{{Note|Combined output power from internal/external speaker and 24VDC beacon driver cannot exceed continuous/peak 7,5W/30W}}





[[Category: Turbine Connections]]