Difference between revisions of "1-1a. Exchange startup (solution)"
From Zenitel Wiki
(→Coldstart:) |
(→Cards:) |
||
| Line 5: | Line 5: | ||
===Cards:=== | ===Cards:=== | ||
| − | *Insert the ASLT card in position 1. | + | *Insert the [[ASLT]] card in position 1. |
| − | *Insert the AMC-IP card in position 7. | + | *Insert the [[AMC-IP]] card in position 7. |
===Power:=== | ===Power:=== | ||
Revision as of 23:22, 26 February 2011
Practice 1-1a:
Cards:
Power:
- Connect the power source to the plug on the back of the exchange, marked 24 VAC IN
- Connect the mains cable to the wall outlet
- Observe the exchange starting
Coldstart:
- Press and hold the coldstart button on the AMC-IP board
- Press the reset button on the power card briefly
- Keep the cold start button pressed at least 2 sec. after reset.
- The AMC status LED will blink green when the boot is ready.