1-1a. Exchange startup (solution)

Practice 1-1a:

System configuration

Cards:

• Insert the ASLT card in position 1.
• Insert the AMC-IP card in position 7.

Power:

• Connect the power source to the plug on the back of the exchange, marked 24 VAC IN
• Connect the mains cable to the wall outlet
• Observe the exchange starting

Coldstart:

• Press and hold the coldstart button on the AMC-IP board
• Press the reset button on the power card briefly
• Keep the cold start button pressed at least 2 sec. after reset.
• The AMC status LED will blink green when the boot is ready.

---

Related articles

• Exchange startup (practice)