Difference between revisions of "1-1c. AlphaPro - Getting started (solution)"

Revision as of 13:00, 13 February 2014

System configuration

Install AlphaPro on a computer
Start AlphaPro by doubleclicking the AlphaPro icon on your desktop
You will be prompted to create a new Network and a new Exchange
- Write in a suitable Network and Exchange name
- Click Ok

Create new Network and Exchange

In AlphaPro go to Users & Stations in the main menu
Select physical number 1; 101 SystemStat.
Use the section on the right and change the directory number to 416
- You will be prompted that this number already exist, and if you want to replace it. Click Yes
Change the name to Reception, click Ok
Select physical number 2; 102 Station 2
Use the section on the right and change the directory number to 6540
Change the name to T. Edison, click Ok

AlphaPro: Users & Stations

Connect the PC to ethernet port 0 of the AlphaCom
In AlphaPro click on SendAll
You will be prompted to log in
- Default username: admin
- Default password: alphaadmin
The whole database will now be sent to the exchange. When it is finished, click Close

Check that the displays on the two master stations show 416 Reception and 6540 T. Edison
On the reception station dial 6540 and observe that the call is connected. Test both incoming and outgoing audio
On the T. Edison station dial 416 and observe that the call is connected. Test both incoming and outgoing audio

@@ Line 26: / Line 26: @@
 ====Send the changes====
 * Connect the PC to ethernet port 0 of the AlphaCom
-*In AlphaPro go to ''Start Communication Program'' in the main menu
+*In AlphaPro click on ''SendAll''
 *You will be prompted to log in
 **Default username: '''''admin'''''
 **Default password: '''''alphaadmin'''''
-*The ''AlphaCom Communication'' program will start
+*The whole database will now be sent to the exchange. When it is finished, click ''Close''
-*Click ''SendAll''
-*The whole database will now be sent to the exchange. When it is finished, click ''Ok''
 ===Test===