Difference between revisions of "1-2a. Analogue Stations – Dual Display (solution)"
From Zenitel Wiki
(→Additional information) |
(→Configuration) |
||
| Line 3: | Line 3: | ||
__NOTOC__ | __NOTOC__ | ||
===Configuration=== | ===Configuration=== | ||
| − | + | *In AlphaPro go to '''Users & Stations''', and select physical number 3; 103 Station 3 | |
| − | *In AlphaPro go to '''Users & Stations''' | + | *Use the section on the right and change the configuration as follows: |
| − | + | [[File:1-2a solution.PNG|400px|AlphaPro: Users & Stations]] | |
| − | *Use the section on the right and change the | + | |
| − | |||
| − | |||
* Send the changes to the AlphaCom | * Send the changes to the AlphaCom | ||
* Check that the display on the dual display station shows: 102 A. Einstein | * Check that the display on the dual display station shows: 102 A. Einstein | ||
| − | |||
===DAK keys=== | ===DAK keys=== | ||
Revision as of 15:14, 17 March 2011
Configuration
- In AlphaPro go to Users & Stations, and select physical number 3; 103 Station 3
- Use the section on the right and change the configuration as follows:
- Send the changes to the AlphaCom
- Check that the display on the dual display station shows: 102 A. Einstein
DAK keys
- In AlphaPro go to Users & Stations in the main menu
- Select physical number 3
- Click the DAK button in the lower left corner
- Select the DAK 1-10 tab
- Insert field 1: I416
- Insert in field 2: I6540
- Press DAK1 and observe that 416 Reception is called
- Press DAK2 and observe that 6540 T. Edison is called
Additional information
When selecting Station Type = DualDisplay, the Navigation keys below the display are automatically configured. You can view the navigation key programming by selecting Users & Stations -> DAK -> Navig. Keys tab
- Check that key 1-4 are:
- I60 (Info menu)
- I9543 (Page UP)
- I9544 (Page DOWN)
- I9542 (Menu)