Actions

Difference between revisions of "1-3d. IP Stations – SIP Station X-Lite (solution)"

From Zenitel Wiki

(Troubleshooting)
Line 4: Line 4:
 
__NOTOC__
 
__NOTOC__
  
=== Install and configure the SoftClient ===
+
=== Install and configure the X-Lite SIP client===
 
* Download the file '''SoftClientSetup.msi''' from e.g. [[Downloads#SoftClient|AlphaWiki]] or from Partnernet,  and install it on the PC
 
* Download the file '''SoftClientSetup.msi''' from e.g. [[Downloads#SoftClient|AlphaWiki]] or from Partnernet,  and install it on the PC
 
* Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
 
* Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0

Revision as of 17:55, 22 March 2011

System configuration



Install and configure the X-Lite SIP client

  • Download the file SoftClientSetup.msi from e.g. AlphaWiki or from Partnernet, and install it on the PC
  • Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
  • Start the SoftClient, and select File -> Preferences, and set these parameters:
SoftClient: File -> Preferences window


  • Save Settings
  • Select Configure Audio Device to adjust speaker and microphone levels

Configure the AlphaCom XE

  • In AlphaPro go to Users & Stations, and select physical number 41; 141 Station 41
  • Use the section on the right and change the configuration as follows:
AlphaPro: Users & Stations window


  • Send the changes to the AlphaCom XE

SendChg.PNG

Troubleshooting

  • If the X-Lite does not register, check the following:
    • In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
    • In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations




Related articles