Difference between revisions of "1-3d. IP Stations – SIP Station X-Lite (solution)"

Revision as of 17:59, 22 March 2011

System configuration

Download from internet http://www.counterpath.com/x-lite.html, and install it on the PC
During installation you are asked to create a SIP account. Fill in these parameters:

SoftClient: File -> Preferences window

Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
Start the SoftClient, and select File -> Preferences, and set these parameters:
Save Settings
Select Configure Audio Device to adjust speaker and microphone levels

In AlphaPro go to Users & Stations, and select physical number 41; 141 Station 41
Use the section on the right and change the configuration as follows:

AlphaPro: Users & Stations window

If the X-Lite does not register, check the following:
- In AlphaWeb, System Configuration -> Filters, verify that ports for SIP and VoIP Audio are enabled
- In AlphaWeb, System Configuration -> Licenses, verify that there are licenses installed for SIP Stations

@@ Line 6: / Line 6: @@
 === Install and configure the X-Lite SIP client===
 * Download from internet http://www.counterpath.com/x-lite.html, and install it on the PC
+* During installation you are asked to create a SIP account. Fill in these parameters:
+[[File:1-3d solution1.PNG|thumb|left|250px|SoftClient: File -> Preferences window]]
+<br style="clear:both;" />
 * Change the IP address of the PC to 10.1.10.2, and subnet mask 255.255.0.0
 * Start the SoftClient, and select '''File''' -> '''Preferences''', and set these parameters:
-[[File:1-3c solution1.PNG|thumb|left|250px|SoftClient: File -> Preferences window]]
-<br style="clear:both;" />
 * '''Save Settings'''
 * Select '''Configure Audio Device''' to adjust speaker and microphone levels