Difference between revisions of "2-2c. CCTV with data (1) - Event Handler (practice)"
From Zenitel Wiki
| Line 11: | Line 11: | ||
* The AlphaCom should be set as a "TCP Server", and TCP port number 4005 should be used for the communication (Hint: Remember to define the port in "Filters" setting). | * The AlphaCom should be set as a "TCP Server", and TCP port number 4005 should be used for the communication (Hint: Remember to define the port in "Filters" setting). | ||
* Use the software "PuTTY" to verify that the correct data is being transmitted from the AlphaCom (In PuTTY use the protocol = "Raw"). | * Use the software "PuTTY" to verify that the correct data is being transmitted from the AlphaCom (In PuTTY use the protocol = "Raw"). | ||
| + | |||
| + | <br><br><br><br> | ||
| + | |||
| + | ---- | ||
| + | |||
| + | ===Related articles === | ||
| + | * [[2-2c. CCTV with data (1) - Event Handler (solution)]] | ||
[[Category: AlphaCom practice]] | [[Category: AlphaCom practice]] | ||
Revision as of 16:08, 27 September 2013
Call buttons:
- Pressing the call button at the Entrance or at the SOS Point should generate a Call Request (623 + 101) to the Control Room.
CCTV Control:
- When a Call Request (= mail) is received at the Control Room, the AlphaCom should send ASCII text on the EDO port 1 to the CCTV system, telling which camera to connect to which monitor.
- The EDO output should be "C1M1" when station 107 is calling, and "C2M1" when station 108 is calling.
- The AlphaCom should be set as a "TCP Server", and TCP port number 4005 should be used for the communication (Hint: Remember to define the port in "Filters" setting).
- Use the software "PuTTY" to verify that the correct data is being transmitted from the AlphaCom (In PuTTY use the protocol = "Raw").