Difference between revisions of "Program Source"
From Zenitel Wiki
| Line 8: | Line 8: | ||
|'''Feature number''': || 118 | |'''Feature number''': || 118 | ||
|-valign="top" | |-valign="top" | ||
| − | |'''Parameter 1''': Program number | + | |'''Parameter 1''': || Program number |
|-valign="top" | |-valign="top" | ||
|'''Description''': || | |'''Description''': || | ||
| Line 14: | Line 14: | ||
I.e. it is not possible to source program 1-8 for the XE20/26 exchanges since APC will already be sourcing the programs. | I.e. it is not possible to source program 1-8 for the XE20/26 exchanges since APC will already be sourcing the programs. | ||
|- | |- | ||
| − | |'''Parameter 2''': Group number | + | |'''Parameter 2''': || Group number , Default 0 |
|-valign="top" | |-valign="top" | ||
|'''Description''': || | |'''Description''': || | ||
Revision as of 08:07, 15 June 2016
| Feature: | Source program audio from station (From 12.3.3.1) |
| Default directory number: | - |
| Feature number: | 118 |
| Parameter 1: | Program number |
| Description: |
Program number to source audio. 1-38. The program must not have any program hardware connected/configured. (AGA/ASLT). |
| Parameter 2: | Group number , Default 0 |
| Description: |
Setup program <param 1> to group <param2> 1->38 |