1-4j. RCO, Call indication (solution): Difference between revisions
From Zenitel Wiki
| Line 4: | Line 4: | ||
'''Private Ringing indication''' | '''Private Ringing indication''' | ||
'' | *''When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).'' | ||
''*The lamp should be turned off when the private ringing stops.'' | ''*The lamp should be turned off when the private ringing stops.'' | ||
''* Use logical RCO 10 to operate the relay'' | ''* Use logical RCO 10 to operate the relay'' | ||
Revision as of 14:54, 29 June 2016
Solution
Private Ringing indication
- When calling the Main Guard in private ringing mode, a lamp controlled by the relay in the station should be activated when the private ringing starts. (The Main Guard must be set in “Private” mode by pressing the C-key for more than 2 sec.).
*The lamp should be turned off when the private ringing stops. * Use logical RCO 10 to operate the relay
Call Queue indication
*When the Main Guard receives a Call Request, the same lamp should be activated to indicate that there is one or more calls in the call queue (Tip: Use event "Priority Mail Present").
- The lamp should be turned off when there are no more calls in the queue.