Actions

TFIX Connections: Difference between revisions

From Zenitel Wiki

No edit summary
Line 54: Line 54:


===Flowire connection===
===Flowire connection===
[[File:TFIX Connections 1.PNG|thumb|right|300px]]
Procedures for connecting power supply, LAN network and Inputs/Outputs are described in the
The TFIX station features two [[FCDC-2|Flowire]] connectors. Power and signal redundancy can be achieved by utilizing both Flowire connectors in an A-B system configuration.
manual A100K11499 Ex Turbine Intercoms & Exigo Access Panels Installation & Maintenance
Do not connect more than 9 Ex Products to each central Flowire Converter.
Procedures.
 
Only use one of the Flowire connectors on each Ex product for each central Flowire Converter.
 
Load sharing power supply must be used for redundant cabling solutions.
 
[[File:TFIX Connections 3.PNG|left|400px]]
<br style="clear:both;" />
 
'''The main board receives both power and Ethernet signals through two wires. You can connect either'''
'''A or B for connection to the rest of the system, or both A and B, each to a separate server,'''
'''in order to achieve redundancy.'''
 




[[Category: Turbine Connections]]
[[Category: Turbine Connections]]

Revision as of 17:03, 2 January 2017

TFIX connections

All connections are made on the main board inside the enclosure of the Turbine Ex station.

Connections

The blue connector is marked +, -, S, and numbers 1 to 9. These should be utilized as follows:

J13 + Integrated Mic +
- Integrated Mic -
S Chassis ground
J6 1 Audio accessory speaker +
2 Audio accessory speaker -
3 Audio accessory microphone mic +
J7 4 Audio accessory microphone mic -
5 Audio accessory Push To Talk (PTT)
6 Audio accessory Hook
J9 7 Audio accessory Ground PTT/Hook
8 Loudspeaker +
9 Loudspeaker -



Flowire connection

Procedures for connecting power supply, LAN network and Inputs/Outputs are described in the manual A100K11499 Ex Turbine Intercoms & Exigo Access Panels Installation & Maintenance Procedures.

MediaWiki spam blocked by CleanTalk.