IP Desktop Station LED Indications: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
[[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]] | [[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
'''Blinking at 1 second intervals:'''<br/> | |||
Station has no connection to the AlphaCom XE Audio Server. | |||
Possible reasons: | Possible reasons: | ||
* No connection to Ethernet | |||
* Wrong AlphaCom IP address configured | |||
* Invalid IP address | |||
* No gateway or wrong gateway to the AlphaCom XE Audio Server | |||
'''Blinking at 5 second intervals:'''<br/> | |||
Station connected but NOT registered in the AlphaCom XE Audio Server. | |||
Possible reasons: | |||
* Station has not been programmed in AlphaPro | |||
* Missing IP Station license in AlphaCom XE Audio Server | |||
'''No blinking:''' | |||
Possible reasons: | Possible reasons: | ||
* Station connected and registered to the AlphaCom XE Audio Server | |||
* Station not powered up (if no other LEDs are active) | |||
[[Category:INCA Indication LEDs]] | [[Category:INCA Indication LEDs]] | ||
Revision as of 11:28, 25 October 2016
Station LED
LED4 - Red 5mm LED on board rear side, also seen through front plate.
Blinking at 1 second intervals:
Station has no connection to the AlphaCom XE Audio Server.
Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom IP address configured
- Invalid IP address
- No gateway or wrong gateway to the AlphaCom XE Audio Server
Blinking at 5 second intervals:
Station connected but NOT registered in the AlphaCom XE Audio Server.
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in AlphaCom XE Audio Server
No blinking:
Possible reasons:
- Station connected and registered to the AlphaCom XE Audio Server
- Station not powered up (if no other LEDs are active)