Difference between revisions of "IP Desktop Station LED Indications"
From Zenitel Wiki
Line 3: | Line 3: | ||
[[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]] | [[File:IP Master Indications 1.PNG|left|thumb|200px|Station LED]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
− | + | '''Blinking at 1 second intervals:'''<br/> | |
− | + | Station has no connection to the AlphaCom XE Audio Server. | |
− | |||
Possible reasons: | Possible reasons: | ||
− | + | * No connection to Ethernet | |
− | + | * Wrong AlphaCom IP address configured | |
− | + | * Invalid IP address | |
− | + | * No gateway or wrong gateway to the AlphaCom XE Audio Server | |
− | + | '''Blinking at 5 second intervals:'''<br/> | |
− | + | Station connected but NOT registered in the AlphaCom XE Audio Server. | |
− | + | Possible reasons: | |
− | + | * Station has not been programmed in AlphaPro | |
− | + | * Missing IP Station license in AlphaCom XE Audio Server | |
− | + | '''No blinking:''' | |
Possible reasons: | Possible reasons: | ||
− | + | * Station connected and registered to the AlphaCom XE Audio Server | |
− | + | * Station not powered up (if no other LEDs are active) | |
[[Category:INCA Indication LEDs]] | [[Category:INCA Indication LEDs]] |
Revision as of 11:28, 25 October 2016
Station LED
LED4 - Red 5mm LED on board rear side, also seen through front plate.
Blinking at 1 second intervals:
Station has no connection to the AlphaCom XE Audio Server.
Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom IP address configured
- Invalid IP address
- No gateway or wrong gateway to the AlphaCom XE Audio Server
Blinking at 5 second intervals:
Station connected but NOT registered in the AlphaCom XE Audio Server.
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in AlphaCom XE Audio Server
No blinking:
Possible reasons:
- Station connected and registered to the AlphaCom XE Audio Server
- Station not powered up (if no other LEDs are active)