Difference between revisions of "INCA Display Station Restore Factory Defaults"
From Zenitel Wiki
| Line 1: | Line 1: | ||
This procedure is the recommended procedure for all IP Stations with Display. | This procedure is the recommended procedure for all IP Stations with Display. | ||
| + | |||
The procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected. | The procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected. | ||
| + | |||
| + | The [[IP DualDisplay]] station can also be restored through an [[alternative procedure]]. | ||
The Station Menu is only available when the IP Station is in offline mode. | The Station Menu is only available when the IP Station is in offline mode. | ||
Revision as of 05:53, 25 October 2016
This procedure is the recommended procedure for all IP Stations with Display.
The procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.
The IP DualDisplay station can also be restored through an alternative procedure.
The Station Menu is only available when the IP Station is in offline mode.
- Make sure the IP Station is disconnected from the AlphaCom XE exchange.
- Press the Setup button beneath the display
- Enter the password 1851 and press the Ok button.
- Navigate to Load defaults and press the Sel button.
- Press the Sel button to load factory defaults.
The station will now restart with factory settings.