INCA DualDisplay Station LED Indicators: Difference between revisions
From Zenitel Wiki
(Created page with "====Station LED==== LED4 - Red 5mm LED on board rear side, also seen through front plate. left|thumb|200px|Station LED <br style="clear:both;" />...") |
|||
| Line 1: | Line 1: | ||
====Station LED==== | ====Station LED==== | ||
[[File:IPDualDisplayLED.png|left|thumb|200px|Station LED]] | [[File:IPDualDisplayLED.png|left|thumb|200px|Station LED]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
Revision as of 10:15, 26 October 2016
Station LED
Blinking at 1 second intervals:
Station has no connection to the AlphaCom XE Audio Server.
Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom IP address configured
- Invalid IP address
- No gateway or wrong gateway to the AlphaCom XE Audio Server
Blinking at 5 second intervals:
Station connected but NOT registered in the AlphaCom XE Audio Server.
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in AlphaCom XE Audio Server
No blinking:
Possible reasons:
- Station connected and registered to the AlphaCom XE Audio Server
- Station not powered up (if no other LEDs are active)