Difference between revisions of "Pulse Server"
From Zenitel Wiki
| Line 4: | Line 4: | ||
Note that you get extended functionality when using a [[Turbine series|Turbine station]] with firmware 4.2 or higher as Pulse Server. | Note that you get extended functionality when using a [[Turbine series|Turbine station]] with firmware 4.2 or higher as Pulse Server. | ||
| − | The Pulse Server must have a static IP address (not dynamically assigned via DHCP). | + | The Pulse Server must have a '''static IP address''' (not dynamically assigned via DHCP). |
[[Category: Pulse]] | [[Category: Pulse]] | ||
Revision as of 14:30, 10 January 2017
One of the intercom stations in a Pulse system must be set as the Pulse Server. The Pulse Server is acting as a server for the other intercom stations in the system. Any IP Intercom station can be a Pulse Server. There must be only one Pulse Server in the installation.
Note that you get extended functionality when using a Turbine station with firmware 4.2 or higher as Pulse Server.
The Pulse Server must have a static IP address (not dynamically assigned via DHCP).