Difference between revisions of "INCA Station Restore Factory Defaults"
From Zenitel Wiki
| (8 intermediate revisions by one other user not shown) | |||
| Line 3: | Line 3: | ||
* IP Substations - [[Weather and Vandal Resistant IP Substation - 1008041100|1008041100]]/[[Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000|1008051000]] | * IP Substations - [[Weather and Vandal Resistant IP Substation - 1008041100|1008041100]]/[[Weather and Vandal Resistant IP Substation for 3 gang Back Box - 1008051000|1008051000]] | ||
* IP Video Door Stations - [[IP Video Door Station - 1401110100|1401110100]]/[[IP Video Door Station - 1401110200|1401110200]] | * IP Video Door Stations - [[IP Video Door Station - 1401110100|1401110100]]/[[IP Video Door Station - 1401110200|1401110200]] | ||
| − | + | <div style="text-align:left;"> <youtube width="300" height="180">W_YbTuXvr1w</youtube> </div> | |
| − | |||
| − | <div style="text-align:left;"> <youtube width="300" height="180"> | ||
<br> | <br> | ||
| − | <div style="text-align:left;"> <youtube width="300" height="180"> | + | <div style="text-align:left;"> <youtube width="300" height="180">bJhq8uyTP24</youtube> </div> |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==Procedure == | ==Procedure == | ||
When loading factory defalt settings, the unit can be set to use either '''Static IP''' or '''DHCP'''. | When loading factory defalt settings, the unit can be set to use either '''Static IP''' or '''DHCP'''. | ||
| − | [[File:Load Defaults without Display - 1.PNG|right|200px]] | + | [[File:Load Defaults without Display - 1.PNG|thumb|right|200px]] |
| − | + | ||
| − | [[File:Load Defaults without Display - 2.PNG|right|200px]] | + | [[File:Load Defaults without Display - 2.PNG|right|thumb|200px]] |
# While pressing the call button, power up the station and keep the button pressed. | # While pressing the call button, power up the station and keep the button pressed. | ||
# Release the button '''after exactly 2 flashes''' of the LED. | # Release the button '''after exactly 2 flashes''' of the LED. | ||
| Line 25: | Line 18: | ||
# Keep the button pressed until the LED '''flashes fast 2 time'''s (Static IP) or '''flashes fast 4 times''' (DHCP) indicating a successful reset. | # Keep the button pressed until the LED '''flashes fast 2 time'''s (Static IP) or '''flashes fast 4 times''' (DHCP) indicating a successful reset. | ||
# Release the button and the station will restart with the factory default settings. | # Release the button and the station will restart with the factory default settings. | ||
| + | <br> | ||
== Factory default values == | == Factory default values == | ||
Latest revision as of 13:16, 15 May 2018
Applicable for stations
- IP Substations - 1008041100/1008051000
- IP Video Door Stations - 1401110100/1401110200
Procedure
When loading factory defalt settings, the unit can be set to use either Static IP or DHCP.
- While pressing the call button, power up the station and keep the button pressed.
- Release the button after exactly 2 flashes of the LED.
- Let the LED flash for exactly 2 more times (Static IP) or exactly 4 more times (DHCP), then press the button again.
- Keep the button pressed until the LED flashes fast 2 times (Static IP) or flashes fast 4 times (DHCP) indicating a successful reset.
- Release the button and the station will restart with the factory default settings.
Factory default values
- Station Mode: Pulse
- Station IP address: 169.254.1.100 (Static) or DHCP
- Username: admin
- Password: alphaadmin
|
Software 01.06 and earlier: Username/password is ADMIN/alphacom |