Difference between revisions of "INCA Display Station Restore Factory Defaults"
From Zenitel Wiki
| Line 1: | Line 1: | ||
{{APS}}This procedure is the recommended procedure for all IP Stations with Display. | {{APS}}This procedure is the recommended procedure for all IP Stations with Display. | ||
| − | The Station Menu is available in both Pulse and SIP mode. <br/> | + | * The Station Menu is available in both Pulse and SIP mode. <br/> |
| − | In Alphacom mode it is only available when the IP Station is offline mode. i.e. not registered to the server. | + | * In Alphacom mode it is only available when the IP Station is offline mode. i.e. not registered to the server. |
'''See video:''' | '''See video:''' | ||
Revision as of 13:20, 15 May 2018
This procedure is the recommended procedure for all IP Stations with Display.
- The Station Menu is available in both Pulse and SIP mode.
- In Alphacom mode it is only available when the IP Station is offline mode. i.e. not registered to the server.
See video:
Procedure
- Press the Setup button beneath the display
- Enter the password 1851 and press the Ok button.
- Navigate to Load defaults and press the Sel button.
- Press the Sel button to load factory defaults.
Factory default values
The station will now restart with factory settings:
- Station Mode: Pulse
- Station IP address: 169.254.1.100
- Username: admin
- Password: alphaadmin
|
This procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected. |