Difference between revisions of "DTMF During Connection"
From Zenitel Wiki
Line 1: | Line 1: | ||
+ | {| | ||
+ | |- | ||
+ | |width="170pt"|'''Feature''': | ||
+ | | Generate DTMF during conversatiion | ||
+ | |- | ||
+ | |'''Default directory number''': || None | ||
+ | |- | ||
+ | |'''Feature number''': || 107 | ||
+ | |-valign="top" | ||
+ | |'''Parameter 1''': || 0 (N/A) | ||
+ | |-valign="top" | ||
+ | |'''Description''': || This feature is only available during connection. | ||
+ | |||
+ | |} | ||
+ | |||
+ | |||
+ | [[AlphaCom Feature List|Back to feature list]] | ||
+ | |||
+ | |||
+ | |||
{| border="1" | {| border="1" | ||
|+ '''107 FEAT_DTMF_DURING_CONN FEATURE''' <BR\> | |+ '''107 FEAT_DTMF_DURING_CONN FEATURE''' <BR\> |
Revision as of 16:33, 7 February 2008
Feature: | Generate DTMF during conversatiion |
Default directory number: | None |
Feature number: | 107 |
Parameter 1: | 0 (N/A) |
Description: | This feature is only available during connection. |
Param1 | Description | |
---|---|---|
0 - 9 1 | DTMF tones 0-9 | |
10 and 11 1 | '*' and '#' | |
255 | DTMF tone activated. Following digits dialed are transmitted as DTMF digits | |
1 Length of tone = RCO Pulse Time (default 3,5 seconds) |
Examples:
- Directory number 1, feature 107/1: When digit 1 is pressed during conversation, DTMF digit 1 is transmitted (default for 3,5 seconds)
- Directory number 1, feature 107/5: When digit 1 is pressed during conversation, DTMF digit 5 is transmitted (default for 3,5 seconds)
- Directory number 1, feature 107/255: Dial digit 1 during conversation to enter "DTMF transmission mode". Audio from the conversation is now switched off. Successive digits will be sent as DTMF digits. E.g. 1 + 345 will send DTMF 3, then 4, then 5. The DTMF tone is transmitted as long as the digit is pressed. Press C-key to leave the "DTMF transmission mode" and return back to conversation mode.
Note that the audio from the conversation is switched off during DTMF tone transmission.