Group call feature: Difference between revisions
From Zenitel Wiki
(Added description for parameter 2 and 3) |
No edit summary |
||
| Line 11: | Line 11: | ||
|- | |- | ||
|'''Parameter 2''': | |'''Parameter 2''': | ||
|PA Control Bitmap: [[PA activation, one-step#PA control bitmap]] | |PA Control Bitmap: [[ PA activation, one-step#PA control bitmap | Control Bitmap]] | ||
|- | |- | ||
|'''Parameter 3''': | |'''Parameter 3''': | ||
Revision as of 14:37, 18 January 2019
| Feature: | Group call |
| Default directory number: | 84-88, 890-899 |
| Feature number: | 39 |
| Parameter 1: | 1-250 = Group index number |
| Parameter 2: | PA Control Bitmap: Control Bitmap |
| Parameter 3: | 0 = Dynamic multicast port/address (default). > 0 = static port/address. (From 13.1.3.0) |
| Description: | Group call (voice paging) to a group of stations. Dial group number and press M-key to talk. |
Note: In a system with IP Stations, maximum 50 stations will receive group call by default. This is because the group call audio is by default transmitted using unicast. If there are larger groups than 50 members, one have to enable group call via multicast. (AlphaPro: Exchange & System > System > VoIP tab > Enable "Multicast"). See also: Multicast_in_AlphaCom