Difference between revisions of "IP Hotline Connections"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| + | The IP Hotline comes with either the INCA IP Flush Master board, or the TKIS-2 kit inside. | ||
| + | ==Turbine Based== | ||
| + | === Introduction === | ||
| + | The table below is an overview of the main connectors involved when installing the IP Hotline Station. | ||
| + | |||
| + | {| border="1" | ||
| + | |Ethernet/Power|| 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. | ||
| + | |- | ||
| + | |Secondary Power || 24 VDC (16 – 48 V) secondary power is provided from an external adapter. | ||
| + | |- | ||
| + | |Relays || There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W | ||
| + | |- | ||
| + | |Input/Output || 6 general purpose I/Os are available. Each I/O can be configured as either input, output, or LED driver. | ||
| + | |- | ||
| + | |Audio Line Out || A balanced 600 ohm audio line out with induction loop signal | ||
| + | |} | ||
| + | |||
| + | To access these connectors the front cover must be removed. | ||
| + | |||
| + | [[File:IP Master Station Kit.PNG|right|300px]] | ||
| + | === Power Supply === | ||
| + | The IP Hotline Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line. | ||
| + | |||
| + | If PoE is not available, the IP Hotline Station can be connected to a 24 VDC local power supply. | ||
| + | |||
| + | See Related Article [[TKIS Connections]] for local power supply connections. | ||
| + | |||
| + | === Network Connection === | ||
| + | There is one RJ-45 port on this IP Hotline Station that is used for PoE/LAN Ethernet connection: | ||
| + | :* LAN port (P1): for connecting to the network and the AlphaCom XE Audio Server. | ||
| + | |||
| + | === Input/Output Connections === | ||
| + | There are 6 I/O connection options for the IP Hotline Station. | ||
| + | These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems. | ||
| + | |||
| + | ==== P2 - Relay Output and External Power Input ==== | ||
| + | [[File:IP Master Board 2.PNG|left|thumb|200px|P3]] | ||
| + | <br style="clear:both;" /> | ||
| + | *Pin 1/2 Connection to the loudspeaker of the handset | ||
| + | *Pin 3/4 Internal NO relay contact for additional call indication etc. | ||
| + | *Pin 5/6 Connect 24 VDC for station power if PoE is not used. Pin 6 is positive. | ||
| + | |||
| + | ==== P4 - Inputs and Station LED ==== | ||
| + | 6-pin plug-on screw terminal for external connections. | ||
| + | [[File:IP Master Board 3.PNG|left|thumb|200px|P4]] | ||
| + | <br style="clear:both;" /> | ||
| + | *Pin 1/4 Input for Hookswitch for handset cradle (and for restoring Factory Default Setting) | ||
| + | *Pin 2/4 Input 2 (optional) | ||
| + | *Pin 3/4 Input 3 (optional) | ||
| + | *Pin 5/6 Station LED for call message info. (Pin 6 is positive.) | ||
| + | |||
| + | ==== J10 - Microphone ==== | ||
| + | Connection to handset microphone | ||
| + | [[File:IP Master Board 10.PNG|left|thumb|200px|J10]] | ||
| + | <br style="clear:both;" /> | ||
| + | *Pin 1 MIC+ | ||
| + | *Pin 2 MIC- | ||
| + | |||
| + | Note that the microphone selection switch next to connector J10 should be in the '''left position''', labeled "Int.". | ||
| + | |||
| + | |||
| + | For more details see [[INCA Substation Board Connectors]]. | ||
| + | |||
| + | |||
==INCA Based== | ==INCA Based== | ||
=== Introduction === | === Introduction === | ||
| Line 26: | Line 90: | ||
=== Network Connection === | === Network Connection === | ||
| − | There are two RJ45 ports on | + | There are two RJ45 ports on this IP Hotline Station: |
:* LAN port (P1): for connecting to the network and the AlphaCom XE Audio Server. | :* LAN port (P1): for connecting to the network and the AlphaCom XE Audio Server. | ||
:* AUX port (P2): for connecting to auxiliary equipment such as a PC or IP Camera. | :* AUX port (P2): for connecting to auxiliary equipment such as a PC or IP Camera. | ||
Revision as of 09:07, 22 February 2019
The IP Hotline comes with either the INCA IP Flush Master board, or the TKIS-2 kit inside.
Contents
Turbine Based
Introduction
The table below is an overview of the main connectors involved when installing the IP Hotline Station.
| Ethernet/Power | 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| Secondary Power | 24 VDC (16 – 48 V) secondary power is provided from an external adapter. |
| Relays | There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W |
| Input/Output | 6 general purpose I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
| Audio Line Out | A balanced 600 ohm audio line out with induction loop signal |
To access these connectors the front cover must be removed.
Power Supply
The IP Hotline Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.
If PoE is not available, the IP Hotline Station can be connected to a 24 VDC local power supply.
See Related Article TKIS Connections for local power supply connections.
Network Connection
There is one RJ-45 port on this IP Hotline Station that is used for PoE/LAN Ethernet connection:
- LAN port (P1): for connecting to the network and the AlphaCom XE Audio Server.
Input/Output Connections
There are 6 I/O connection options for the IP Hotline Station. These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.
P2 - Relay Output and External Power Input
- Pin 1/2 Connection to the loudspeaker of the handset
- Pin 3/4 Internal NO relay contact for additional call indication etc.
- Pin 5/6 Connect 24 VDC for station power if PoE is not used. Pin 6 is positive.
P4 - Inputs and Station LED
6-pin plug-on screw terminal for external connections.
- Pin 1/4 Input for Hookswitch for handset cradle (and for restoring Factory Default Setting)
- Pin 2/4 Input 2 (optional)
- Pin 3/4 Input 3 (optional)
- Pin 5/6 Station LED for call message info. (Pin 6 is positive.)
J10 - Microphone
Connection to handset microphone
- Pin 1 MIC+
- Pin 2 MIC-
Note that the microphone selection switch next to connector J10 should be in the left position, labeled "Int.".
For more details see INCA Substation Board Connectors.
INCA Based
Introduction
The table below is an overview of the main connectors involved when installing the IP Hotline Station.
| LAN (P1) | 10/100 Mbps RJ45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| AUX (P2) | 10/100 Mbps RJ45 port for auxilliary equipment such as PC or IP Camera. |
| Input/Output | Pluggable screw terminal |
| Local Power | Pluggable screw terminal, 17-27 VDC Idle 4W, max. 8W |
To access these connectors the front cover must be removed.
Power Supply
The IP Hotline Station supports Power over Ethernet (PoE, IEEE 802.3 a-f) where power can be drawn from either the spare line or signal line.
If PoE is not available, the IP Hotline Station can be connected to a 24 VDC local power supply.
See Related Article INCA Master Station Kit Board Connectors for local power supply connections.
Network Connection
There are two RJ45 ports on this IP Hotline Station:
- LAN port (P1): for connecting to the network and the AlphaCom XE Audio Server.
- AUX port (P2): for connecting to auxiliary equipment such as a PC or IP Camera.
Input/Output Connections
There are I/O connection options for the IP Hotline Station. These I/O connections include:
P3 - External Loudspeaker, Relay Output and External Power Input
6-pin plug-on screw terminal for external connections.
- Pin 1/2 Connection to the loudspeaker of the handset
- Pin 3/4 Internal NO relay contact for additional call indication etc.
- Pin 5/6 Connect 24 VDC for station power if PoE is not used. Pin 6 is positive.
P4 - Inputs and Station LED
6-pin plug-on screw terminal for external connections.
- Pin 1/4 Input for Hookswitch for handset cradle (and for restoring Factory Default Setting)
- Pin 2/4 Input 2 (optional)
- Pin 3/4 Input 3 (optional)
- Pin 5/6 Station LED for call message info. (Pin 6 is positive.)
J10 - Microphone
Connection to handset microphone
- Pin 1 MIC+
- Pin 2 MIC-
Note that the microphone selection switch next to connector J10 should be in the left position, labeled "Int.".
For more details see INCA Substation Board Connectors.