Difference between revisions of "Pulse Server"
From Zenitel Wiki
| (6 intermediate revisions by the same user not shown) | |||
| Line 2: | Line 2: | ||
One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[:Category:Stations|IP Intercom station]] can be a Pulse Server. There must be only one Pulse Server in the installation. | One of the intercom stations in a Pulse system must be set as the '''Pulse Server'''. The Pulse Server is acting as a server for the other intercom stations in the system. Any [[:Category:Stations|IP Intercom station]] can be a Pulse Server. There must be only one Pulse Server in the installation. | ||
| − | + | The Pulse Server must have a '''static IP address''' (not dynamically assigned via DHCP). | |
| − | + | {{obs|It is recommended not to use TCIV (Turbine station with camera) as Pulse server in a system with more than 5 registered clients. For such systems please use any other Vingtor-Stentofon IP station type, such as TCIS-x, or TKIS-2. }} | |
| − | [[Category: Pulse - | + | [[Category: Pulse - Configuration]] |
Latest revision as of 16:20, 7 March 2019
One of the intercom stations in a Pulse system must be set as the Pulse Server. The Pulse Server is acting as a server for the other intercom stations in the system. Any IP Intercom station can be a Pulse Server. There must be only one Pulse Server in the installation.
The Pulse Server must have a static IP address (not dynamically assigned via DHCP).
|
It is recommended not to use TCIV (Turbine station with camera) as Pulse server in a system with more than 5 registered clients. For such systems please use any other Vingtor-Stentofon IP station type, such as TCIS-x, or TKIS-2. |