Actions

Difference between revisions of "AlphaPro - Compatibility"

From Zenitel Wiki

Line 5: Line 5:
 
[[File:AlphaPro Compatibility.png|thumb|left|800px]]
 
[[File:AlphaPro Compatibility.png|thumb|left|800px]]
 
<br style="clear:both;" />
 
<br style="clear:both;" />
 +
 +
{{note| AlphaPro 12.0 does GetAll using http requests. This is supported as from AlphaCom ver. 12. However, it is possible to open AlphaPro 10 or 11 databases using AlphaPro 12.}}
  
 
{{note| As from AlphaPro version 11.5 there is '''no support for serial communication''', which is needed to configure AMC 9. For AMC9 and mixed networks, AlphaPro 11.2.x.x must be used.}}
 
{{note| As from AlphaPro version 11.5 there is '''no support for serial communication''', which is needed to configure AMC 9. For AMC9 and mixed networks, AlphaPro 11.2.x.x must be used.}}

Revision as of 15:14, 6 June 2019

The table below shows compatibility between:

  • AlphaPro and Windows OS versions
  • AlphaPro and AlphaCom software versions
AlphaPro Compatibility.png


Note icon AlphaPro 12.0 does GetAll using http requests. This is supported as from AlphaCom ver. 12. However, it is possible to open AlphaPro 10 or 11 databases using AlphaPro 12.


Note icon As from AlphaPro version 11.5 there is no support for serial communication, which is needed to configure AMC 9. For AMC9 and mixed networks, AlphaPro 11.2.x.x must be used.


Note icon Databases made in a later AlphaPro version may not function properly if used in an older AlphaPro version. It is recommended to always use the latest AlphaPro version.