|
|
| Line 21: |
Line 21: |
| | <br style="clear:both;" /> | | <br style="clear:both;" /> |
| | | | |
| − | =Flush Mounting=
| |
| − | ==Flush Mount 2-Gang Back Box - TA-2==
| |
| − | [[File:TA-2 dimensions.PNG|''TA2 2-Gang backbox dimensions'']]
| |
| | | | |
| − | '''Note!''' It is recommended to utilize back boxes with weep holes at the bottom
| |
| − |
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | ==Flush Mount Bracket - TA-5==
| |
| − | Fits US 2-GANG electrical boxes. Recommended screw diameter: up to M4 (5/32"). Use screw recommended by back box manufacurer.
| |
| − |
| |
| − | [[File:TCAS Mounting-5.PNG|''TA-5 Mounting Bracket dimensions'']]
| |
| − | [[File:TCAS Mounting-6.PNG|''TA-5 Mounting Bracket'']]
| |
| − |
| |
| − | '''Note!''' The TA-5 Bracket is mandatory for flush mounting.
| |
| − |
| |
| − | <br style="clear:both;" />
| |
| − |
| |
| − | ==Flush Mounting Procedure==
| |
| − | [[File:TCIS Flush Mounting.PNG]]
| |
| − |
| |
| − | :1. Mount the 2-gang back box into the wall
| |
| − | :2. Mount the bracket onto the back box
| |
| − | :3. Fit the gasket onto the bracket with the ridged side facing down
| |
| − | ::–Plug the Ethernet cable into the RJ-45 port on the station
| |
| − | :4. Mount the Turbine station onto the bracket with the M5 fasteners provided
| |
| − |
| |
| − | '''Ensure the station is mounted vertically with the microphone aperture facing down'''
| |
| − |
| |
| − | '''Ensure there is enough clearance under the station so that the microphone aperture is not smothered'''
| |
| | | | |
| | [[Category: Turbine Dimensions & Mounting Instructions]] | | [[Category: Turbine Dimensions & Mounting Instructions]] |
