Difference between revisions of "INCA Display Station Restore Factory Defaults"

Latest revision as of 07:35, 24 October 2019

This procedure is the recommended procedure for all IP Stations with Display.

The Station Menu is available in both Edge, Pulse and SIP mode.
In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.

See video:

The station will now restart with factory settings:

This procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.

@@ Line 1: / Line 1: @@
-This procedure is the recommended procedure for all IP Stations with Display.
+{{AEIPS}}This procedure is the recommended procedure for all IP Stations with Display.
-The procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.
+* The Station Menu is available in both Edge, Pulse and SIP mode. <br/>
+* In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.
-The [[IP DualDisplay]] station can also be restored through an [[alternative procedure]].
+'''See video:'''
+<div style="text-align:left;"> <youtube width="300" height="180">78K-S-pn5zg</youtube>  </div>
+<br><br>
-The Station Menu is only available when the IP Station is in offline mode.
+==Procedure ==
-* Make sure the IP Station is disconnected from the AlphaCom XE exchange.
 * Press the '''Setup''' button beneath the display
 * Enter the password '''1851''' and press the '''Ok''' button.
@@ Line 16: / Line 18: @@
 |}
-The station will now restart with factory settings.
+== Factory default values ==
+The station will now restart with factory settings:
+*Station Mode: '''Pulse'''
+*Station IP address: '''169.254.1.100'''
+*Username: '''admin'''
+*Password: '''alphaadmin'''
+{{note|This procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.}}
 [[Category: INCA - Restore Factory Defaults and Software Upgrade]]