Difference between revisions of "INCA Display Station Restore Factory Defaults"

Latest revision as of 07:35, 24 October 2019

This procedure is the recommended procedure for all IP Stations with Display.

The Station Menu is available in both Edge, Pulse and SIP mode.
In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.

See video:

The station will now restart with factory settings:

This procedure may also be applied to the IP Master Station Kit - 1008093000 if a Display is connected.

@@ Line 1: / Line 1: @@
-{{APS}}This procedure is the recommended procedure for all IP Stations with Display.
+{{AEIPS}}This procedure is the recommended procedure for all IP Stations with Display.
-The Station Menu is available when the IP Station is in offline mode. i.e. not registered to the server.
+* The Station Menu is available in both Edge, Pulse and SIP mode. <br/>
-* Make sure the IP Station is disconnected from the AlphaCom XE exchange.
+* In Alphacom mode the Station Menu is only available when the IP Station is offline mode. i.e. not registered to the server.
+'''See video:'''
+<div style="text-align:left;"> <youtube width="300" height="180">78K-S-pn5zg</youtube>  </div>
+<br><br>
+==Procedure ==
 * Press the '''Setup''' button beneath the display
 * Enter the password '''1851''' and press the '''Ok''' button.
@@ Line 12: / Line 18: @@
 |}
-The station will now restart with factory settings.
+== Factory default values ==
+The station will now restart with factory settings:
+*Station Mode: '''Pulse'''
+*Station IP address: '''169.254.1.100'''
+*Username: '''admin'''
+*Password: '''alphaadmin'''
- The procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.
+{{note|This procedure may also be applied to the [[IP Master Station Kit - 1008093000]] if a Display is connected.}}
 [[Category: INCA - Restore Factory Defaults and Software Upgrade]]