Difference between revisions of "Touchless sensor (w/ backbox)"
From Zenitel Wiki
(→Use Case Examples) |
(→Use Case Examples) |
||
| Line 33: | Line 33: | ||
=== Configuration on IC-Edge === | === Configuration on IC-Edge === | ||
| + | To configure the Inputs select '''Edge Controller''' > '''System Configuration''' > '''Direct Access Keys'''. | ||
| + | Select '''Show/Hide Settings''' on the station you want to configure. | ||
| + | |||
| + | |||
[[Category:Additional equipment]] | [[Category:Additional equipment]] | ||
Revision as of 12:29, 20 October 2020
The Touchless sensor (item 2390020100) is an IR-sensor that connects to Turbine Compact stations and is used to activate calls with gesture recognition instead of pressing the call button.
Contents
Highlights
- Input Voltage: 5V
- Available contacts: Normally Open & Normally Closed
- Operating distance 3 to 20 cm (adjustable)
- IP 66
Connections
Connections are made to the switch using the supplied 5 pin plug.
Correct orientation of the plug is ensured by the connector locating guides.
Color code
- Red - +5 Volt supply
- Brown - 0 Volt supply
- Green - Normally Closed
- Blue - Common
- Purple - Normally Open
Settings
Typical Application
Use Case Examples
Touchless sensor wired to Input 1 on a Turbine station:
Configuration on IC-Edge
To configure the Inputs select Edge Controller > System Configuration > Direct Access Keys. Select Show/Hide Settings on the station you want to configure.