Difference between revisions of "Touchless sensor (w/ backbox)"
From Zenitel Wiki
(→Configuration on IC-Edge) |
|||
| Line 37: | Line 37: | ||
[[File:Direct Access Keys.png|thumb|500px|left|Direct Access Keys]] | [[File:Direct Access Keys.png|thumb|500px|left|Direct Access Keys]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | + | Inputs (and DAK keys) have two states: | |
| + | * '''Idle''': There is no active call on the station. | ||
| + | * '''Call''': There is an incoming, outgoing or active call on the station. | ||
[[Category:Additional equipment]] | [[Category:Additional equipment]] | ||
Revision as of 12:44, 20 October 2020
The Touchless sensor (item 2390020100) is an IR-sensor that connects to Turbine Compact stations and is used to activate calls with gesture recognition instead of pressing the call button.
Contents
Highlights
- Input Voltage: 5V
- Available contacts: Normally Open & Normally Closed
- Operating distance 3 to 20 cm (adjustable)
- IP 66
Connections
Connections are made to the switch using the supplied 5 pin plug.
Correct orientation of the plug is ensured by the connector locating guides.
Color code
- Red - +5 Volt supply
- Brown - 0 Volt supply
- Green - Normally Closed
- Blue - Common
- Purple - Normally Open
Settings
Typical Application
Use Case Examples
Touchless sensor wired to Input 1 on a Turbine station:
Configuration on IC-Edge
To configure the Inputs select Edge Controller > System Configuration > Direct Access Keys.
Select Show/Hide Settings on the station you want to configure:
Inputs (and DAK keys) have two states:
- Idle: There is no active call on the station.
- Call: There is an incoming, outgoing or active call on the station.