Difference between revisions of "TKIS Connections"
From Zenitel Wiki
| Line 18: | Line 18: | ||
* When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned. | * When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned. | ||
* To make the kit speak its IP address: | * To make the kit speak its IP address: | ||
| − | + | ** connect a speaker to the speaker output | |
| − | + | ** connect a button to input 1 | |
| − | + | ** press the button after startup | |
[[File:TKIS2SpeakIP.png|thumb|left|200px]] | [[File:TKIS2SpeakIP.png|thumb|left|200px]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| − | |||
| − | |||
| − | |||
===Network Connection=== | ===Network Connection=== | ||
| Line 31: | Line 28: | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
There is one RJ-45 port located on the Turbine Compact Kit that is used for PoE/LAN Ethernet connection. | There is one RJ-45 port located on the Turbine Compact Kit that is used for PoE/LAN Ethernet connection. | ||
| + | |||
| + | |||
| + | ===Power Supply (optional)=== | ||
| + | The Turbine Compact Kit supports Power over Ethernet (PoE). If PoE is not available, the Turbine Compact Kit can be powered from a 24 VDC local power supply. | ||
| + | |||
===Input/Output Connections=== | ===Input/Output Connections=== | ||
Revision as of 12:58, 21 September 2021
| Ethernet/Power | 10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection. Supports PoE (802.3af). Draws power from either spare line or signal line. |
| Secondary Power | 24 VDC (16 – 48 V) secondary power is provided from an external adapter. |
| Relays | There is one Double Throw relay contact with 60W switching power. COM, NO, NC contacts are provided. Max: 250VAC/220VDC, 2A, 60W |
| Input/Output | 6 general purpose I/Os are available. Each I/O can be configured as either input, output, or LED driver. |
| Audio Line Out | A balanced 600 ohm audio line out with induction loop signal |
- When the Turbine Kit is connected to the network, its IP address is automatically obtained from a DHCP server or an IP address in the range 169.254.x.x will be assigned.
- To make the kit speak its IP address:
- connect a speaker to the speaker output
- connect a button to input 1
- press the button after startup
Network Connection
There is one RJ-45 port located on the Turbine Compact Kit that is used for PoE/LAN Ethernet connection.
Power Supply (optional)
The Turbine Compact Kit supports Power over Ethernet (PoE). If PoE is not available, the Turbine Compact Kit can be powered from a 24 VDC local power supply.
Input/Output Connections
There are 6 I/O connection options for the Turbine Compact Kit. These connections can be used to interface with external I/O devices. The connections are typically used as digital input (eg. from a closing contact), digital output (5V), or LED driving (20mA max) for connecting sensors, indicators or integration to other systems.
See also Turbine Compact Board Connectors