Group call feature: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 20: | Line 20: | ||
* IP port: 61102 (Group call default port 61002 + (2 * 50)) | * IP port: 61102 (Group call default port 61002 + (2 * 50)) | ||
|- valign="top" | |- valign="top" | ||
|'''Description''': || [[Groups#Group_Call | |'''Description''': || [[Groups#Group_Call|Group call]] (voice paging) to a group of stations. Dial group number and press M-key to talk. | ||
|} | |} | ||
Latest revision as of 11:49, 7 March 2022
| Feature: | Group call |
| Default directory number: | 84-88, 890-899 |
| Feature number: | 39 |
| Parameter 1: | 1-250 = Group index number |
| Parameter 2: | PA Control Bitmap: Control Bitmap |
| Parameter 3: | 0 = Dynamic multicast port/address (default). 1-255 = static port/address. (From 13.1.3.0)
Example Param3 = 50 with default IP settings and Node number 1:
|
| Description: | Group call (voice paging) to a group of stations. Dial group number and press M-key to talk. |
|
In a system with IP Stations, maximum 50 stations will receive group call by default. This is because the group call audio is by default transmitted using unicast. If there are larger groups than 50 members, group calls must use multicast. (AlphaPro: Exchange & System -> System -> VoIP tab -> Enable "Multicast"). See also: Multicast_in_AlphaCom |